Crochet Tutorial: Twilight Bluebell Fairy Bunny – Free Crochet Pattern

This elegant crochet set features a sweet bunny doll dressed in a twilight blue outfit, complete with a cloche hat, layered capelet, fitted dress, tiny shoes, a travel case with a birdcage, and a charming owl companion. It makes a beautiful handmade gift, collectible doll, nursery decor piece, or boutique amigurumi display item.

The design blends a vintage storybook mood with practical amigurumi shaping, making it ideal for makers searching for a crochet doll pattern, bunny amigurumi tutorial, handmade stuffed animal gift idea, or artisan crochet decor project. Each piece is shaped to match the proportions and styling shown in the photo as closely as possible.

Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.

Materials

• Main bunny color: light cream or warm ivory cotton yarn
• Dress and accessories: deep blue, medium denim blue, dusty lavender, and soft periwinkle cotton yarn
• Owl colors: light beige, brown, golden yellow, burgundy, navy, and small amount of black and white
• Birdcage: beige or flax yarn
• Hook: 2.0 mm to 2.5 mm, or size needed to keep stitches tight
• Stuffing: polyester fiberfill
• Safety eyes: 8 mm for bunny, 10 to 12 mm flat eyes or crocheted/appliqué eyes for owl
• Tapestry needle
• Stitch marker
• Scissors
• Thin cardboard or plastic canvas: optional for suitcase base
• Floral wire or craft wire: optional for wand and birdcage stability
• Small pearl beads: for shoe trim
• Small button bead: for cape closure
• Blush or soft pastel: optional for cheeks

Finished Size

The bunny doll is approximately 9.5 to 11 inches tall from foot to top of hat, depending on yarn and hook choice.

The owl is approximately 3 inches tall. The suitcase is approximately 3 inches wide. The birdcage is sized to fit inside the suitcase and should be slightly shorter than the case height when closed.

Skill Level

Advanced beginner to intermediate. The stitches are simple, but the shaping, layering, and neat finishing are important for the final look.

Abbreviations

• MR = magic ring
• ch = chain
• sl st = slip stitch
• sc = single crochet
• inc = 2 sc in the same stitch
• dec = invisible decrease
• hdc = half double crochet
• dc = double crochet
• tr = treble crochet
• BLO = back loop only
• FLO = front loop only
• st = stitch
• sts = stitches
• rep = repeat

Notes Before You Start

• Work the bunny, owl, and suitcase mostly in continuous rounds unless stated otherwise.
• Use a stitch marker at the first stitch of each round.
• Stuff firmly but do not overstuff the head or dress, or the silhouette will lose its smooth shape.
• The hat, capelet, dress, shoes, suitcase lid, scarf, and wand are separate pieces.
• To keep the doll standing better for photos, the feet should be flat, and the lower body should be stuffed firmly.
• For the closest visual match, keep all stitching tight and even.

Bunny Doll

Head

Using light cream yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts
4. Round 4: (2 sc, inc) x 6. 24 sts
5. Round 5: (3 sc, inc) x 6. 30 sts
6. Round 6: (4 sc, inc) x 6. 36 sts
7. Round 7: (5 sc, inc) x 6. 42 sts
8. Round 8: (6 sc, inc) x 6. 48 sts
9. Rounds 9 to 18: sc around. 48 sts

📌Thank you for reading the article

Insert 8 mm safety eyes between Rounds 13 and 14 with approximately 10 visible stitches between them. Place them slightly wide to create the calm, gentle expression shown in the image.

Begin stuffing the head firmly and evenly. Keep the face rounded, not pointed.

10. Round 19: (6 sc, dec) x 6. 42 sts
11. Round 20: sc around. 42 sts
12. Round 21: (5 sc, dec) x 6. 36 sts
13. Round 22: (4 sc, dec) x 6. 30 sts
14. Round 23: (3 sc, dec) x 6. 24 sts

Stuff a little more before closing to keep the lower face full.

15. Round 24: (2 sc, dec) x 6. 18 sts

Do not fasten off if you want to crochet the neck directly into the body. Otherwise, fasten off and sew later.

Muzzle Shaping and Nose

Using matching yarn, embroider a tiny upside-down triangular nose centered between the eyes, about 2 rounds below eye level.

Add a short vertical stitch under the nose. Keep the mouth minimal. The original look is very soft and understated.

Ears Make 2

Using light cream yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: (sc, inc) x 3. 9 sts
3. Round 3: (2 sc, inc) x 3. 12 sts
4. Round 4: (3 sc, inc) x 3. 15 sts
5. Rounds 5 to 16: sc around. 15 sts
6. Round 17: (3 sc, dec) x 3. 12 sts
7. Rounds 18 to 24: sc around. 12 sts
8. Round 25: (2 sc, dec) x 3. 9 sts
9. Rounds 26 to 28: sc around. 9 sts

Flatten each ear and lightly steam or finger-shape so the ear hangs softly. Do not stuff, or only add a tiny bit at the base if needed.

Fasten off with a long tail for sewing. Sew the ears to the head around Rounds 7 to 9, one on each side, angled down so they fall beside the face as shown.

Neck

If continuing from the head:

1. Round 1: BLO sc around. 18 sts
2. Round 2: sc around. 18 sts
3. Round 3: (sc, dec) x 6. 12 sts

The neck should be narrow to support the larger head. Stuff very firmly here.

Body and Lower Dress Form

Switch to dusty lavender yarn for the visible lower dress/body section.

1. Round 4: BLO (sc, inc) x 6. 18 sts
2. Round 5: (2 sc, inc) x 6. 24 sts
3. Round 6: sc around. 24 sts
4. Round 7: (3 sc, inc) x 6. 30 sts
5. Round 8: sc around. 30 sts
6. Round 9: (4 sc, inc) x 6. 36 sts
7. Rounds 10 to 22: sc around. 36 sts

Stuff the body firmly as you go. Keep the front and back smooth. The body should look like a long, straight dress tube with only a slight shape.

10. Round 23: BLO sc around. 36 sts
11. Round 24: sc around. 36 sts

Fasten off. The ruffle is made into the front loops left from Round 23.

Bottom Ruffle

Join dusty lavender yarn to any front loop from Round 23.

1. Round 1: FLO (2 dc in each st) around. 72 sts
2. Round 2: (dc, inc dc) around. 108 sts
3. Round 3: sc around loosely. 108 sts

Fasten off. Arrange the ruffle so it flares gently rather than standing stiffly.

📌Thank you for reading the article

Arms Make 2

Using light cream yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: (sc, inc) x 3. 9 sts
3. Rounds 3 to 5: sc around. 9 sts
4. Round 6: (sc, dec) x 3. 6 sts
5. Rounds 7 to 17: sc around. 6 sts

Stuff only the lower half lightly. Flatten the top opening.

Fasten off with a long tail. Sew arms at the upper body just below the cape line, angled slightly downward. From the front, the hands should hang near the widest edge of the capelet.

Legs Make 2

Begin with cream yarn.

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts
4. Round 4: BLO sc around. 18 sts
5. Round 5: sc around. 18 sts
6. Round 6: 5 sc, 4 dec, 5 sc. 14 sts
7. Round 7: sc around. 14 sts
8. Round 8: 4 sc, 3 dec, 4 sc. 11 sts
9. Rounds 9 to 18: sc around. 11 sts

Stuff the foot firmly, but keep the ankle and leg more lightly stuffed so they stay neat and narrow.

Fasten off first leg. Make second leg but do not fasten off if you want to join them under the body. For this design, it is easier to sew the legs directly under the dress body.

Sew the legs centered under the body with a small gap between them. They should extend just enough to show cream legs and allow the shoes to remain visible below the dress ruffle.

Dress Top Panel

The visible upper bodice peeks out beneath the capelet and is a deeper blue.

Using medium blue yarn, make a small rectangle:

1. Ch 11.
2. Row 1: starting in second ch from hook, sc across. 10 sts
3. Rows 2 to 8: ch 1, turn, sc across. 10 sts

Fasten off. Wrap and sew this panel neatly to the upper front body so it shows beneath the neckline opening of the capelet. The rectangle should be centered and narrow.

Cloche Hat

Using deep blue yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts
4. Round 4: (2 sc, inc) x 6. 24 sts
5. Round 5: (3 sc, inc) x 6. 30 sts
6. Round 6: (4 sc, inc) x 6. 36 sts
7. Round 7: (5 sc, inc) x 6. 42 sts
8. Round 8: (6 sc, inc) x 6. 48 sts
9. Rounds 9 to 16: sc around. 48 sts

Try the hat on the bunny. It should sit low and round, covering the top of the head and the upper forehead.

10. Round 17: BLO sc around. 48 sts
11. Round 18: (7 sc, inc) x 6. 54 sts
12. Round 19: sc around. 54 sts

For the softly rolled brim:

13. Round 20: sl st loosely around, or work loose crab stitch if preferred. 54 sts

Fasten off. Shape the brim with fingers so it curls slightly upward and outward, especially at the front edge.

📌Thank you for reading the article

Layered Capelet

This is one of the most important pieces for matching the photo. It is short, rounded, and made with layered scallops.

Using periwinkle or dusty blue-lavender yarn:

1. Ch 36, join carefully without twisting to form a ring.
2. Round 1: ch 1, sc around. 36 sts
3. Round 2: ch 2, hdc around. 36 sts
4. Round 3: (5 dc in next st, sl st in next st, skip 1 st) rep around, adjusting at end to maintain even scallops.

This creates the upper decorative edge. Now build the cape body downward.

4. Round 4: Join yarn at inner neckline on the underside. ch 1, sc around into the bases of Round 2. 36 sts
5. Round 5: (5 sc, inc) x 6. 42 sts
6. Round 6: hdc around. 42 sts
7. Round 7: (6 sc, inc) x 6. 48 sts
8. Round 8: dc around. 48 sts
9. Round 9: (7 sc, inc) x 6. 54 sts

Lower scalloped edge:

10. Round 10: (sl st in next st, skip 1 st, 6 dc in next st, skip 1 st) rep around.

Second layered row under the cape:

11. Join yarn to the inside of Round 7 or 8, slightly below the first body layer.
12. Round 11: ch 1, work 36 evenly spaced sc around the underside.
13. Round 12: (4 sc, inc) x 6. 42 sts
14. Round 13: (sl st in next st, skip 1 st, 5 dc in next st, skip 1 st) rep around.

Fasten off. Weave in ends very neatly because this piece is highly visible.

To wear, place the capelet around the neck with the opening at center front. Overlap the neckline slightly and sew in place. Add a tiny blue bead or button at the front closure point.

Shoes Make 2

Use medium blue yarn with cream and pearl bead accents.

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts
4. Round 4: BLO sc around. 18 sts
5. Round 5: sc around. 18 sts
6. Round 6: 5 sc, 4 dec, 5 sc. 14 sts
7. Round 7: sc around. 14 sts

Fasten off with a sewing tail. Slip each shoe over the foot and stitch invisibly at the back if needed.

For the pearl strap look, sew 4 to 5 tiny white seed beads or make a surface chain across the top front edge of each shoe. The trim should resemble a neat row of pearls.

Suitcase Base

Using deep blue yarn:

Base Panel

1. Ch 11.
2. Round 1: sc in second ch from hook and next 8 ch, 3 sc in last ch, continue on opposite side with 8 sc, 2 sc in last ch. 21 sts
3. Round 2: inc, 8 sc, 3 inc, 8 sc, 2 inc. 27 sts
4. Round 3: sc around. 27 sts

Side Walls

4. Round 4: BLO sc around. 27 sts
5. Rounds 5 to 10: sc around. 27 sts

Fasten off. If desired, insert a matching oval of thin cardboard into the base before lining or lightly stitching closed.

Suitcase Lid

Repeat Base Panel Rounds 1 to 3.

1. Round 4: BLO sc around. 27 sts
2. Rounds 5 to 7: sc around. 27 sts

Fasten off.

Hinge Join

Hold the lid against the back top edge of the suitcase base. Using matching yarn, sew about one-third of the back edge to create a hinged opening.

The lid should stay open at an angle, like in the photo.

📌Thank you for reading the article

Corner and Button Details

Using tan or beige yarn, crochet 4 small corner patches for the base and 2 for the lid.

1. Ch 3.
2. Row 1: 2 sc in second ch from hook, sc in next ch. 3 sts
3. Row 2: ch 1, turn, inc, sc, inc. 5 sts

Fasten off and sew to corners.

Add a tiny round button or crocheted button to the front center of the suitcase.

Handle

1. Ch 8.
2. Row 1: sc in second ch from hook and across. 7 sts

Fasten off, curve into an arch, and sew to the lid.

Birdcage

Use beige or flax yarn. A bit of craft wire inside makes it hold shape better, but it can also be made entirely with yarn.

Base Ring

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts
4. Round 4: BLO sc around. 18 sts
5. Round 5: sc around. 18 sts

Fasten off.

Vertical Bars Make 6

1. Ch 16.
2. Row 1: sl st in second ch from hook and across. 15 sts

Make 6 identical bars. Attach evenly around the inner edge of the base ring.

Top Ring

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts

Sew the tops of the bars to this ring, curving them inward to create the cage dome shape.

Top Loop

1. Ch 8.
2. Sl st into first ch to form a loop.

Sew to the center top of the cage.

Place the cage inside the suitcase so it leans slightly, matching the visual arrangement in the photo.

Owl Companion

Body

Using light beige yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: (sc, inc) x 6. 18 sts
4. Round 4: (2 sc, inc) x 6. 24 sts
5. Rounds 5 to 9: sc around. 24 sts
6. Round 10: (2 sc, dec) x 6. 18 sts
7. Round 11: sc around. 18 sts
8. Round 12: (sc, dec) x 6. 12 sts

Stuff firmly.

9. Round 13: dec around. 6 sts

Fasten off and close.

Eye Patches Make 2

Using white yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts

Fasten off. Sew to the upper front body slightly overlapping in the center.

📌Thank you for reading the article

Add black pupils using safety eyes, felt, or embroidery. Keep them large and round for the whimsical look.

Beak

Using golden yellow yarn:

1. Ch 3.
2. Row 1: sc in second ch from hook and next ch. 2 sts

Fasten off and fold into a tiny triangle. Sew between the eyes.

Wings Make 2

Using brown yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: (sc, inc) x 3. 9 sts
3. Round 3: sc around. 9 sts

Flatten and sew to sides of the body.

Feet Make 2

Using golden yellow yarn:

1. Ch 4.
2. In second ch from hook, sl st, sl st, sl st.

Fasten off and sew under the body.

Scarf

Using burgundy yarn first:

1. Ch 26.
2. Row 1: starting in second ch from hook, sc across. 25 sts

Fasten off and join mustard yellow yarn.

3. Row 2: ch 1, turn, sc across. 25 sts
4. Row 3: switch back to burgundy, ch 1, turn, sc across. 25 sts
5. Row 4: switch to mustard, ch 1, turn, sc across. 25 sts

Add short fringe strands at both ends in matching colors. Wrap around the owl neck and sew lightly in place.

Top Hat

Using navy yarn:

1. Round 1: 6 sc in MR. 6 sts
2. Round 2: inc around. 12 sts
3. Round 3: BLO sc around. 12 sts
4. Rounds 4 to 6: sc around. 12 sts
5. Round 7: BLO (sc, inc) x 6. 18 sts
6. Round 8: sc around. 18 sts

Fasten off. Add a lavender band with a simple surface chain or one round of embroidery. Sew the hat at a slight jaunty angle.

Wand

Using navy yarn for the handle and yellow for the star:

Handle

1. Ch 10.
2. Row 1: sl st in second ch from hook and across. 9 sts

Wrap around a short piece of wire or leave as a flat crocheted strip folded tightly.

Star

1. Round 1: 5 sc in MR, join with sl st.
2. Point 1: ch 3, sl st in second ch from hook, sc in next ch, sl st in next base st.
3. Repeat Point 1 four more times.

Sew star to top of wand. Place the wand under the owl wing so it looks like the owl is holding it.

Color Placement and Styling Tips

• The bunny head, ears, arms, and legs should remain light cream.
• The body section should be dusty lavender, with a slightly darker blue front panel visible near the neckline.
• The hat is the deepest blue in the set.
• The capelet is a soft blue-lavender shade, lighter than the hat and slightly lighter than the dress.
• The shoes match the blue tones and include a small pearl detail.
• The suitcase is deep blue with tan corners and a small beige button.
• The owl uses warm neutral browns and beige so the striped scarf stands out.

Assembly Order

1. Make the head and embroider the face.
2. Make and sew the ears.
3. Complete the neck and body.
4. Add the lower ruffle.
5. Make and sew the arms.
6. Make and sew the legs.
7. Add the blue front dress panel.
8. Make and place the shoes.
9. Make the hat.
10. Make the capelet and attach it around the neck.
11. Make the suitcase and birdcage.
12. Make the owl, scarf, hat, and wand.
13. Arrange all accessories for display.

Final Assembly and Facial Detailing

Sew all pieces using small hidden stitches and always check symmetry from the front before securing tightly. The ears should hang evenly, the eyes should sit wide and level, and the nose should remain tiny and centered.

Add a light touch of blush to the cheeks if desired. Place the hat low on the head, leaving the face fully visible. The capelet should sit high and rounded around the shoulders without hiding the arms completely.

Care Notes

Display the finished set away from direct moisture and rough handling. Small decorative parts such as the owl hat, wand, bead trim, and birdcage loop should be treated gently.

If gifting to a child, consider replacing beads and safety eyes with embroidered details for added safety.

Quick Checklist Before You Finish

• Are the bunny eyes even and placed low enough for a gentle expression?
• Do both ears hang at matching angles?
• Does the hat sit low and rounded like a cloche?
• Is the capelet layered and lightly flared?
• Are the shoes aligned evenly under the dress?
• Does the suitcase lid open neatly?
• Is the owl scarf wrapped close to the neck?
• Does the full set match the soft twilight color story?

Detailed Cleaning and Preservation Guidelines

For dust, use a soft dry brush or gentle cool-air setting from a distance. Spot clean only with a lightly damp cloth and mild soap if needed. Do not soak stuffed pieces unless the yarn label clearly allows it.

Let all pieces air dry fully on a towel, reshaping the hat, capelet, suitcase, and owl accessories while damp. Store in a clean dry box away from sunlight to preserve the color and shaping over time.