Pansy Apron-Parfait Bunny – Crochet

This sweet amigurumi set is designed to look like a collectible crochet bunny doll with a coordinated spring wardrobe, tiny accessories, and a display-ready finish. The finished look feels perfect for shoppers searching for a handmade nursery gift, Easter bunny decor, or a charming amigurumi bunny doll for a seasonal shelf.

The set includes the large bunny, flowered cloche hat, mint dress, layered apron skirt, shoes, backpack, bouquet, small spoon, and a tiny pocket companion. The styling is polished enough for a giftable crochet doll, artisan toy display, or boutique handmade bunny collection while still being enjoyable for everyday makers.

Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.

Overview of the Design

This pattern is written to reproduce the proportions and styling shown in the image as closely as possible. The large bunny has a rounded head, soft cream body, long drooping ears, puff sleeves, a mint bodice, a pink layered skirt, a scalloped apron, flower appliqués, pink shoes, and a lavender cloche hat.

The accessories are an important part of the final display. The set includes a lavender-and-yellow backpack, a tiny bouquet of pansies tied with a ribbon, a small spoon, and a miniature companion figure wearing a matching outfit. Each item is worked separately so the full arrangement looks balanced and complete.

The body is built with a gentle doll structure rather than a floppy plush structure. The head is large but not oversized, the torso is narrow, the arms are soft and lightly tapered, and the legs are straight enough to support the shoes. Careful stuffing and tidy assembly matter as much as stitch counts here.

Materials

• Yarn weight: sport or light DK cotton for the cleanest stitch definition
• Main bunny color: warm cream
• Hat and trim color: soft lavender
• Dress bodice color: pale mint
• Skirt and apron color: soft pink
• Backpack accent color: pale yellow
• Flower colors: lavender, violet, pale yellow, blush pink, soft green
• Hook: 2.0 mm to 2.5 mm, depending on your tension
• Stuffing: fine polyester fiberfill
• Safety eyes: 8 mm for the large bunny, 5 mm for the tiny companion
• Tapestry needle
• Stitch marker
• Sewing pins or clips
• Thin cardboard or plastic insert: optional for backpack base
• Craft wire or floral wire: optional for bouquet stems
• Small buttons or crocheted dots: decorative only

Finished Size

• Large bunny: about 9.5 to 11 inches tall without the hat, depending on yarn and tension
• Hat adds roughly 1 inch of height
• Backpack: about one third of the bunny’s torso height
• Tiny companion: about 3 to 3.5 inches tall
• Bouquet: about as long as the bunny’s forearm

Gauge and Tension Notes

Tight, even stitches are essential. The fabric should not show stuffing through the holes. If your stitches look open, go down a hook size. The hat, flowers, apron edge, and shoes all benefit from especially neat tension because these details are very visible in the final display.

The sample proportions assume a firm but not rigid tension. The head should remain rounded, the sleeves should hold a puff shape, and the skirt should flare softly. If your skirt collapses, your stitches may be too loose. If your sleeves look flat, add slightly more stuffing under the sleeve cap.

Abbreviations

• MR = magic ring
• ch = chain
• sl st = slip stitch
• sc = single crochet
• inc = 2 sc in same stitch
• dec = invisible decrease
• hdc = half double crochet
• dc = double crochet
• BLO = back loop only
• FLO = front loop only
• st = stitch
• rnd = round

Color Placement Guide

The cream bunny body forms the face, ears, arms, and legs. The bodice is mint. The upper skirt and apron are soft pink. The lower skirt layer and hat are lavender. The hat band is cream. The pansy flowers use violet, lavender, yellow, and blush with green leaves.

Keep the palette soft. Avoid saturated neon shades. The success of this design comes from the pastel balance: cream softens the doll, mint freshens the bodice, pink warms the skirt, and lavender ties the hat, skirt edge, backpack flap, and accessory accents together.

📌Thank you for reading the article

Large Bunny: Legs

Make 2 in cream. Stuff as you go, especially at the feet and lower legs. The legs should be slim cylinders with slightly rounded feet, not wide boots. The feet only need enough shaping to sit neatly inside the shoes later.

1. Rnd 1: 6 sc in MR. (6)
2. Rnd 2: inc around. (12)
3. Rnd 3: (sc 1, inc) x 6. (18)
4. Rnd 4: sc around. (18)
5. Rnd 5: sc 5, dec 4, sc 5. (14)
6. Rnd 6: sc around. (14)
7. Rnd 7: sc 4, dec 3, sc 4. (11)
8. Rnd 8-20: sc around. (11)

Finish first leg and fasten off. Make second leg but do not fasten off. Add a little extra stuffing to the lower half of each leg so they remain smooth beneath the dress. Keep the upper leg slightly softer to help with joining and sitting balance.

Joining the Legs and Lower Body

Ch 3 from the second leg and join to the first leg. This spacing creates the narrow stance seen in the image. The legs are close together, giving the doll a tidy, upright silhouette rather than a wide plush-animal stance.

1. Rnd 21: sc around first leg, sc across ch 3, sc around second leg, sc across opposite side of ch 3. (28)
2. Rnd 22: sc around. (28)
3. Rnd 23: sc 12, inc 2, sc 12, inc 2. (32)
4. Rnd 24-26: sc around. (32)
5. Rnd 27: (sc 6, dec) x 4. (28)
6. Rnd 28: sc around. (28)
7. Rnd 29: (sc 5, dec) x 4. (24)

At this point the hips should be softly rounded but not prominent. The body in the image is doll-like and smooth, with the skirt doing most of the visual shaping. Keep the stuffing even and avoid a bulky seat or exaggerated tummy.

Torso and Chest

Continue upward in cream until the color change for the bodice. The torso is compact, with only a short distance between the joined legs and the neckline. That helps the head appear larger and sweeter, which matches the overall character in the picture.

1. Rnd 30-33: sc around. (24)
2. Change to mint.
3. Rnd 34: sc BLO around. (24)
4. Rnd 35-38: sc around. (24)
5. Rnd 39: (sc 4, dec) x 4. (20)
6. Rnd 40: sc around. (20)
7. Rnd 41: (sc 3, dec) x 4. (16)

The BLO round creates a clean line where the skirt can later sit beneath the bodice. Keep the mint section smooth and centered because the pansy flowers are placed directly on the chest. Finish stuffing the body firmly before moving into the neck.

Neck

1. Rnd 42-44: sc around. (16)
2. Rnd 45: (sc 2, dec) x 4. (12)
3. Rnd 46-47: sc around. (12)

The neck should be firm. Add a little extra stuffing here, or insert a short rolled piece of felt or a small dowel support if you like. The head is fairly large, and a weak neck will make the hat sit at an awkward angle later.

Head

The face is a smooth round oval with the widest point just under the eye line. The cheeks are subtle. The muzzle is not protruding. The nose is very small, centered, and embroidered in a pale pink-beige shade with a short vertical line below it.

1. Rnd 1: 6 sc in MR. (6)
2. Rnd 2: inc around. (12)
3. Rnd 3: (sc 1, inc) x 6. (18)
4. Rnd 4: (sc 2, inc) x 6. (24)
5. Rnd 5: (sc 3, inc) x 6. (30)
6. Rnd 6: (sc 4, inc) x 6. (36)
7. Rnd 7: (sc 5, inc) x 6. (42)
8. Rnd 8: (sc 6, inc) x 6. (48)
9. Rnd 9-17: sc around. (48)

📌Thank you for reading the article

Insert the safety eyes between rnds 11 and 12 with about 9 stitches between them. In the image, the eyes are wide-set enough to keep the face gentle, but not so wide that the nose disappears. Check the placement before locking the backs.

1. Rnd 18: (sc 6, dec) x 6. (42)
2. Rnd 19: (sc 5, dec) x 6. (36)
3. Rnd 20: (sc 4, dec) x 6. (30)
4. Rnd 21: (sc 3, dec) x 6. (24)

Begin stuffing firmly. Shape the head with your fingers as you work. Focus on a rounded forehead and full cheeks. Do not let the face become pointed or flat. Add stuffing in small pieces and smooth it from the outside before continuing.

1. Rnd 22: (sc 2, dec) x 6. (18)
2. Rnd 23: (sc 1, dec) x 6. (12)

Fasten off with a long tail for sewing to the neck if working separately. If you prefer an integrated construction, attach the head directly to the neck opening by matching 12 stitches evenly. Stitch tightly so the head sits straight and secure.

Ears

Make 2 in cream. The ears are long, softly stuffed only at the upper third, and then left flatter toward the lower length. They drape straight down on either side of the face, disappearing slightly beneath the hat brim and resting near the shoulders.

1. Rnd 1: 6 sc in MR. (6)
2. Rnd 2: (sc 1, inc) x 3. (9)
3. Rnd 3: (sc 2, inc) x 3. (12)
4. Rnd 4-8: sc around. (12)
5. Rnd 9: (sc 2, dec) x 3. (9)
6. Rnd 10-24: sc around. (9)

Flatten the open end and sew each ear to the head around the upper side area, just behind the eye line. The attachment angle should allow the ears to fall vertically. Avoid placing them too high or too far forward, or they will push the hat upward.

Arms

Make 2 in cream. These arms are simple, tapered, and lightly stuffed. They hang down naturally from beneath the puff sleeves. The hands are rounded but understated. Their softness helps the finished bunny look delicate instead of rigid.

1. Rnd 1: 6 sc in MR. (6)
2. Rnd 2: inc around. (12)
3. Rnd 3-4: sc around. (12)
4. Rnd 5: (sc 2, dec) x 3. (9)
5. Rnd 6-16: sc around. (9)

Stuff the lower half lightly. Flatten the top opening and sew the arms later at the shoulder line, angled slightly downward. Do not overstuff near the top. A soft upper arm lets the sleeve sit more naturally and keeps the silhouette neat.

Puff Sleeves

Make 2 in cream first, then add mint edging. These are separate sleeve caps that sit over the top of each arm and shoulder. Their roundness is one of the most recognizable parts of the outfit, so do not skip the shaping.

1. Rnd 1: 6 sc in MR. (6)
2. Rnd 2: inc around. (12)
3. Rnd 3: (sc 1, inc) x 6. (18)
4. Rnd 4: sc around. (18)
5. Rnd 5: change to mint, work (sl st, ch 2, hdc) in every 3rd stitch to create a tiny ruffle.

Place each sleeve cap over the shoulder before attaching the arm. Sew the upper edge onto the body first, then sew the arm beneath it. This layered method gives a rounded puff effect that closely matches the image.

Skirt Base

The skirt is made from the front loops left at the bodice join. It forms a soft bell shape, then receives a lavender lower layer and a pink apron panel over the front. Keep the stitch tension even so the skirt flares smoothly rather than rippling wildly.

1. Join pink to FLO of rnd 34.
2. Rnd 1: inc evenly around from 24 sts to 36 sts using 12 spaced increases. (36)
3. Rnd 2: sc around. (36)
4. Rnd 3: (sc 5, inc) x 6. (42)
5. Rnd 4-6: sc around. (42)
6. Rnd 7: change to lavender, sc around in BLO. (42)
7. Rnd 8: in FLO of previous round, work scallops: skip 1, 5 dc in next, skip 1, sl st in next, repeat around.

📌Thank you for reading the article

The skirt should reach to about the upper ankle, leaving the shoes fully visible. If your bunny is taller or shorter, add or subtract one plain round before the lavender finish. The image shows a full but tidy skirt, not a floor-length dress.

Apron Front Panel

This apron sits over the front of the skirt and is a lighter pink tone if possible. It has a curved lower edge and a scalloped border. Two pansy clusters sit near the lower left and lower right areas of the apron.

1. Ch 20.
2. Row 1: sc in 2nd ch from hook and across. (19)
3. Row 2-5: ch 1, turn, sc across. (19)
4. Row 6: dec, sc 15, dec. (17)
5. Row 7: sc across. (17)
6. Row 8: dec, sc 13, dec. (15)
7. Row 9: sc across. (15)

Work a border around the entire apron in soft pink or lavender. Along the lower edge, add small shell scallops using 3 dc in alternate stitches. The apron should be centered on the skirt front and cover roughly half the visible front width.

Sew the top of the apron onto the waistline and tack the side edges lightly so they stay flat. Do not sew the lower edge tightly all the way down. Leaving a little freedom at the bottom preserves the layered look.

Chest Flowers

The chest has a compact cluster of small pansies centered just below the neckline. Use three to five flowers in mixed pastel shades. Make them small so they decorate the dress without covering the whole bodice. Tiny yellow knot centers finish them beautifully.

Small Pansy Motif

1. With first petal color, make MR.
2. Into ring work: (ch 2, 2 dc, ch 2, sl st) twice for two upper petals.
3. Change color if desired.
4. Into ring work: (ch 1, 2 hdc, ch 1, sl st) three times for lower petals.
5. Pull ring closed and fasten off.

Make several flowers in lavender, violet, pink, and pale yellow. Stitch them to the bodice in a slightly overlapping cluster. Add tiny green leaves peeking from behind one or two flowers. Keep the arrangement centered and compact as shown.

Apron Flowers

Make two mirrored flower clusters for the apron. Each cluster should feature one larger flower and one smaller flower with a couple of leaves. The flowers sit near the lower corners of the apron, not at the waistband and not too close to the scalloped hem.

For the larger flower, increase the number of dc or hdc in each petal so it spreads more visibly. A pale yellow flower paired with violet, and a cream flower paired with lavender, creates the closest visual balance to the image.

Shoes

Make 2. The shoes are pink with a cream or pale yellow sole and tiny side tabs that suggest strap fastenings. They should look neat and rounded, like little Mary Jane-style slippers. The shoes must fit snugly over the feet.

Sole

1. With cream or pale yellow, ch 7.
2. Rnd 1: sc in 2nd ch from hook, sc 4, 3 sc in last ch, continue opposite side with sc 4, 2 sc in final ch. (14)
3. Rnd 2: inc 2, sc 4, inc 3, sc 4, inc 1. (20)

Upper Shoe

1. Change to pink and work 1 round BLO sc around. (20)
2. Rnd 2: sc around. (20)
3. Rnd 3: sc 5, dec 5, sc 5. (15)
4. Rnd 4: sc around. (15)

Fasten off and sew or slip the shoe onto the foot. Add a tiny circular tab or button shape at the outer ankle side. Make sure both shoes angle forward evenly. A misaligned shoe will be noticeable because the legs are narrow and fully visible beneath the skirt.

📌Thank you for reading the article

Cloche Hat

The hat is one of the signature pieces. It is a rounded cloche with a close-fitting crown, a soft cream band, a downward brim, and a flower cluster on one side. It should sit low enough to shade the forehead but not cover the eyes.

1. With lavender, rnd 1: 6 sc in MR. (6)
2. Rnd 2: inc around. (12)
3. Rnd 3: (sc 1, inc) x 6. (18)
4. Rnd 4: (sc 2, inc) x 6. (24)
5. Rnd 5: (sc 3, inc) x 6. (30)
6. Rnd 6: (sc 4, inc) x 6. (36)
7. Rnd 7: (sc 5, inc) x 6. (42)
8. Rnd 8: (sc 6, inc) x 6. (48)
9. Rnd 9-16: sc around. (48)
10. Rnd 17: change to cream, sc around. (48)
11. Rnd 18: change to lavender, BLO sc around. (48)
12. Rnd 19: (sc 7, inc) x 6. (54)
13. Rnd 20-21: sc around. (54)

Finish with a soft rolled edge by slip stitching loosely around the final round. Shape the brim downward with your fingers. If the brim flares too much, use a smaller hook for the last two rounds. The side flower cluster should sit above one ear.

Hat Flower Cluster

Make 3 to 5 tiny flowers using the same pansy motif as above. Add two or three leaves in green. Layer them closely and sew them onto one side of the hat brim and crown join. The cluster should look tucked and slightly angled rather than spread flat.

Backpack

The backpack is worked in lavender and pale yellow with a front pocket, flap, and shoulder strap. Its shape is boxy but soft. The flap is rounded at the bottom. A tiny decorative button or crocheted dot sits on the flap front.

Backpack Body

1. With yellow, ch 11.
2. Rnd 1: sc around foundation oval to form base. Aim for 26 sts total.
3. Rnd 2: BLO sc around. (26)
4. Rnd 3-8: sc around. (26)
5. Change to lavender for upper section.
6. Rnd 9-13: sc around. (26)

Flatten slightly so the backpack front and back are broad rather than cylindrical. Insert a tiny piece of cardboard inside the base if you want a cleaner shape. Keep the body lightly stuffed or unstuffed depending on whether you want a prop or a soft toy accessory.

Front Pocket

1. With yellow, ch 8.
2. Row 1-4: sc across. (7)
3. Work a lavender border across the top edge.

Sew the pocket to the lower front of the backpack. Keep the top edge free. The pocket is centered but sits slightly lower than midpoint. This small detail is very visible and helps the accessory match the image.

Flap and Strap

1. With lavender, ch 10.
2. Row 1-5: sc across. (9)
3. Round the lower corners by working 2 sc together at each side over the final two rows.
4. For the strap, ch 28 to 32, then sl st back along the chain.

Sew the flap to the backpack back upper edge so it folds over the front. Attach the strap from side to side to form a carry loop or shoulder strap. Add a small yellow button circle to the flap front.

Tiny Spoon

This tiny accessory adds whimsy and should be very small. It can be made in gray and pinkish lavender. Work it tightly so it keeps its shape. You may also lightly brush fabric glue on the wrong side after finishing if you want a firmer prop.

1. With gray, ch 5.
2. Work 6 sc around the chain into a tiny oval for the spoon bowl.
3. Continue with 4 to 5 rows of 2 sc for the neck.
4. Change to lavender and work 6 to 8 chains, then sl st back for the handle.

📌Thank you for reading the article

Shape the bowl gently with your fingers. The spoon should be short and decorative, not realistic in scale. It sits beside the backpack in the display and helps fill the scene without distracting from the main doll.

Bouquet of Pansies

Make 5 to 7 tiny flowers in mixed pastel shades. Add small green leaves and gather the stems tightly. The bouquet in the image is compact and tied with a pink ribbon. Avoid making the flowers too large or the bunch will overpower the bunny.

Use the small pansy motif already described. Add one or two leaves to some flowers by chaining 4, slip stitching back, then sewing them behind the petals. For stems, either crochet a short green chain or wrap floral wire with matching yarn.

Bundle the flowers so the violet and lavender blooms sit near the center, with pale yellow and cream flowers softening the edges. Tie a narrow pink ribbon around the stems. Trim the ends short for a neat finish.

Tiny Pocket Companion

This little companion is a separate miniature figure styled to coordinate with the main bunny. In the image it has a rounded face, tiny ears, a mint top, pink skirt, lavender hat, and a small lavender backpack. Keep the body compact and adorable.

Head and Body Combined

1. With cream, rnd 1: 6 sc in MR. (6)
2. Rnd 2: inc around. (12)
3. Rnd 3: (sc 1, inc) x 6. (18)
4. Rnd 4: (sc 2, inc) x 6. (24)
5. Rnd 5-8: sc around. (24)

Insert 5 mm eyes between rnds 5 and 6 with about 5 or 6 stitches between them. Embroider a tiny pink nose and short mouth line. The face should look sweet and simple, with more roundness than the large bunny’s face.

1. Rnd 9: (sc 2, dec) x 6. (18)
2. Rnd 10: sc around. (18)
3. Change to mint.
4. Rnd 11-13: sc around. (18)
5. Change to pink.
6. Rnd 14: (sc 2, inc) x 6. (24)
7. Rnd 15-16: sc around. (24)

Finish the lower edge with lavender shell scallops similar to the main skirt. Stuff firmly before closing the base, or create tiny separate legs if you prefer more detail. For a display companion, a weighted stuffed base is usually enough.

Tiny Arms and Ears

• Arms: make 2 tiny tubes of 6 to 8 sc around for 5 to 6 rounds in cream
• Ears: make 2 tiny half-oval tabs in cream and sew near the top side of the head

The ears should be short and understated so the hat still dominates the silhouette. Sew the arms low on the mint section. Add a tiny backpack or lavender side panel to echo the main bunny’s accessory colors.

Tiny Hat

Work a miniature cloche exactly like the large hat but with fewer increase rounds. Add a cream band and tiny flower or nub details. The hat should sit slightly low and give the companion the same coordinated springtime look.

Leaves

For the hat flowers, bouquet, and apron clusters, make small leaves in green. A simple leaf shape works well and matches the image. Keep them tiny, pointed, and soft so they tuck behind the flowers without dominating the composition.

1. Ch 5.
2. Starting in 2nd ch from hook: sl st, sc, hdc, sl st in last ch.
3. Work opposite side of chain: hdc, sc, sl st.

Assembly Order

Good assembly keeps the set polished. Work slowly, pin pieces before sewing, and compare both sides often. Because the design is highly symmetrical, even small placement shifts can change the whole expression and balance of the doll.

1. Sew the head to the neck securely.
2. Attach the ears so they fall straight down.
3. Sew the sleeve caps onto the shoulders.
4. Attach the arms beneath the sleeves.
5. Add the skirt if made separately from the body loops.
6. Sew the apron onto the front of the skirt.
7. Attach the chest flowers and apron flowers.
8. Fit and secure the shoes.
9. Place the hat and tack it lightly if desired.
10. Finish the backpack, bouquet, spoon, and tiny companion.

Shaping Notes for an Accurate Look

The large bunny should look tidy, upright, and sweet. The head is rounded and calm, the ears are soft and vertical, the arms are narrow, and the dress is structured by layers rather than by heavy stuffing. Keep everything delicate and proportionate.

The hat must not be too tall. A high crown changes the character immediately. The brim should curve down around the face and sit close to the forehead. The flower cluster should be compact and slightly off-center to create the same dressed-up spring look.

The apron should be visible as a separate layer. Use contrast between the pink skirt, lighter apron, and lavender lower edge so the layering reads clearly. The floral appliqués on the chest and apron are not optional decorations here; they are central to the design.

Facial Embroidery Placement

Use a pale pink or pink-beige thread for the nose. Form a small horizontal triangle or tiny satin stitch wedge centered between the eyes, slightly below them. Add a short vertical line downward for the mouth. Keep the embroidery very small and gentle.

If desired, add a faint blush with fabric-safe crayon or dry pastel just beneath the eyes. Apply very lightly. The face in the image is soft and clean, not heavily shaded. Less is better for this character.

Final Assembly and Facial Detailing

Check that the head is straight, the ears hang evenly, and the eyes look level from the front. Pin the hat in place before sewing the flower cluster so the hat decoration frames the face rather than hiding it.

Sew the apron flat at the waist and lightly at the sides. Let the lower edge float. Arrange chest flowers in a tight cluster. Add the nose last if you want the easiest control over the expression.

Set the backpack slightly to one side in the display. Place the spoon near the front. Tie the bouquet neatly and angle it toward the bunny. Keep the tiny companion close enough to read as part of the same collection.

Care Notes

• Display away from direct sunlight to protect the pastel colors.
• Handle flowers, hat trim, and apron appliqués gently.
• If giving to a child, embroider eyes instead of using safety eyes.
• Store the bouquet and spoon separately when not on display.

Quick Checklist Before You Finish

• Hat brim curves downward neatly
• Both ears are even in length and placement
• Chest flower cluster is centered
• Apron flowers are balanced left and right
• Shoes face forward evenly
• Backpack flap closes neatly over pocket
• Bouquet is tied tightly with ribbon
• Tiny companion matches the main color story

Detailed Cleaning and Preservation Guidelines

Dust lightly with a soft dry brush. For small marks, spot clean with a barely damp cloth and mild soap. Do not soak the doll unless your stuffing and accessories are fully washable and colorfast.

Reshape while damp if needed, especially the hat brim and skirt edge. Dry flat on a towel. Avoid hanging the doll by the hat or ears. Store in a breathable box with tissue paper when packing seasonally.

If the bouquet or flowers flatten over time, steam very lightly from a distance and reshape by hand. Keep metal wire, if used, fully covered and dry. Gentle handling will keep the set display-ready for a long time.