Knitting Tutorial: Woodland Husky Botanist in Book Vest with Glasses and Flora Satchel – Free Knitting Pattern.

This woodland husky botanist wears a softly striped field shirt, an olive book-themed vest, patterned field shorts, braided sandals, and round spectacles. The finished character carries a botanical Flora satchel and comes with a matching explorer hat, miniature field guide, magnifying glass, compass charm, and a tiny pencil tucked beside one ear.

 

Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.

Pattern Overview

This pattern creates a seated, softly sculpted husky with a large expressive head, pointed ears, long black paws, forward-facing legs, and a thick curved tail. The clothing and accessories are made separately so they can be positioned accurately and removed carefully when needed.

• Skill level: Intermediate, with detailed guidance for confident beginners.
• Finished seated height: Approximately 17 inches or 43 centimeters.
• Head width: Approximately 6.5 inches or 16.5 centimeters.
• Body circumference: Approximately 11 inches or 28 centimeters.
• Needle style: Small circular needle, double-pointed needles, or magic loop.
• Construction: The head, body, limbs, tail, clothing, and accessories are knitted separately and assembled afterward.

Materials

• DK-weight yarn in marled medium gray for the head and tail.
• DK-weight yarn in charcoal black for the ears, paws, feet, nose, and tail markings.
• DK-weight yarn in natural white for the blaze, muzzle, cheeks, chest ruff, and tail markings.
• DK-weight yarn in oatmeal cream for the shirt, hat, satchel, sandals, and book cover.
• DK-weight yarn in olive green for the vest and field shorts.
• Small quantities of muted teal, rust, copper, mustard, brown, tan, sage, and pale gray yarn.
• US size 2.5 or 3 millimeter knitting needles.
• US size 1.5 or 2.5 millimeter needles for the smaller accessories.
• Two 18-millimeter bright blue safety eyes with black pupils.
• Two thin white felt circles measuring approximately 23 millimeters across.
• Polyester toy stuffing.
• Black, white, gray, brown, green, orange, and red embroidery thread.
• Four small bronze buttons measuring 8 to 10 millimeters.
• One 8-millimeter button for the satchel flap.
• Thin bronze-colored craft wire for the glasses and magnifying glass.
• A clear plastic circle measuring approximately 1.25 inches or 3 centimeters for the magnifying glass.
• Yarn needle, sewing needle, stitch markers, scissors, row counter, and locking stitch markers.
• A small slicker brush or clean hook-and-loop brush for gently fluffing the white cheeks and neck ruff.

Gauge and Tension

Using the larger needles in stockinette stitch, 26 stitches and 36 rounds should measure 4 inches or 10 centimeters. A slightly firm fabric is important because loose stitches may allow stuffing to show through the finished husky.

Use the smaller needles for the satchel, book, sandals, hat details, and magnifying glass cover. Exact gauge is less important for these pieces, but the fabric should remain firm and even.

Abbreviations

• BO: Bind off.
• CO: Cast on.
• k: Knit.
• p: Purl.
• kfb: Knit into the front and back of the same stitch.
• k2tog: Knit two stitches together.
• ssk: Slip one stitch knitwise, slip one stitch knitwise, then knit the two slipped stitches together through the back loops.
• st or sts: Stitch or stitches.
• RS: Right side.
• WS: Wrong side.
• rnd: Round.
• yo: Yarn over.
• pm: Place marker.
• sm: Slip marker.

Important Construction Notes

Use a removable marker to identify the center front of the head and body. The color placement, eye position, blaze, muzzle, vest opening, and accessory alignment all depend on keeping this center line visible throughout the construction.

Stuff gradually with small pieces of filling. Do not push one large piece into a part because this can create lumps. The head should be firm, while the arms, legs, and tail should remain slightly flexible for the seated pose.

Main Husky Body

Striped Torso

The torso is worked from the neck downward. The oatmeal shirt remains visible at the shoulders, sides, and beneath the vest. Use oatmeal as the main color and tan for the narrow field-shirt stripes.

1. With oatmeal yarn, CO 24 sts. Join to work in the round, taking care not to twist. Place a marker at the center back.
2. Rnd 1: Knit all 24 sts.
3. Rnd 2: Repeat k2, kfb around. You will have 32 sts.
4. Rnd 3: Knit all 32 sts.
5. Rnd 4: Repeat k3, kfb around. You will have 40 sts.
6. Rnd 5: Knit all 40 sts.
7. Rnd 6: Repeat k4, kfb around. You will have 48 sts.
8. Rnds 7 to 9: Knit 48 sts in oatmeal.
9. Rnd 10: Change to tan and knit 48 sts.
10. Rnds 11 to 13: Change to oatmeal and knit 48 sts.
11. Rnd 14: Change to tan and knit 48 sts.
12. Rnd 15: Change to oatmeal. Repeat k7, kfb around. You will have 54 sts.
13. Rnds 16 and 17: Knit 54 sts in oatmeal.
14. Rnd 18: Knit 54 sts in tan.
15. Rnds 19 to 21: Knit 54 sts in oatmeal.
16. Rnd 22: Knit 54 sts in tan.
17. Rnds 23 and 24: Knit 54 sts in oatmeal.
18. Rnd 25: Repeat k8, kfb around. You will have 60 sts.
19. Rnd 26: Knit 60 sts in tan.
20. Rnds 27 to 29: Knit 60 sts in oatmeal.
21. Rnd 30: Knit 60 sts in tan.
22. Rnds 31 and 32: Knit 60 sts in oatmeal.
23. Rnd 33: Repeat k8, k2tog around. You will have 54 sts.
24. Rnd 34: Repeat k7, k2tog around. You will have 48 sts.
25. Begin stuffing the torso. Keep the upper chest moderately firm and make the lower body rounded enough to support the seated position.
26. Rnd 35: Repeat k6, k2tog around. You will have 42 sts.
27. Rnd 36: Repeat k5, k2tog around. You will have 36 sts.
28. Rnd 37: Repeat k4, k2tog around. You will have 30 sts.
29. Add more stuffing, shaping a broad rounded seat and a slightly narrower waist.
30. Rnd 38: Repeat k3, k2tog around. You will have 24 sts.
31. Rnd 39: Repeat k2, k2tog around. You will have 18 sts.
32. Rnd 40: Repeat k1, k2tog around. You will have 12 sts.
33. Cut the yarn, thread it through the remaining stitches, pull firmly, and secure inside the body.

📌Thank you for reading the article

Front Legs and Black Feet

Make two matching legs. Each leg is knitted from the rounded foot toward the upper thigh. The black lower legs remain visible below the patterned shorts and inside the braided sandals.

1. With charcoal yarn, CO 8 sts and join in the round.
2. Rnd 1: Kfb in every stitch. You will have 16 sts.
3. Rnd 2: Repeat k1, kfb around. You will have 24 sts.
4. Rnds 3 to 9: Knit 24 sts.
5. Rnd 10: Repeat k4, k2tog around. You will have 20 sts.
6. Rnds 11 to 28: Knit 20 sts.
7. Stuff the foot firmly and the long leg more lightly. Keep the top 0.75 inch or 2 centimeters nearly flat for easier attachment.
8. BO all 20 sts. Leave a 16-inch or 40-centimeter sewing tail.
9. Flatten the upper edge so that 10 sts form the front layer and 10 sts form the back layer.

Using white embroidery thread, sew three short vertical toe lines across each rounded foot. Position the lines approximately 0.4 inch or 1 centimeter from the cast-on center, spacing them evenly across the front.

Leg Placement

Pin the legs to the lower front of the body with their upper edges centered approximately 10 stitches apart. Angle each leg forward at about 35 degrees and slightly outward. Sew each flattened upper edge securely through the body fabric and stuffing.

Arms and Black Paws

Make two arms. The paws are black, while the upper arms continue the oatmeal and tan striped shirt. The arms should hang beside the vest and bend gently toward the lap.

1. With charcoal yarn, CO 8 sts and join in the round.
2. Rnd 1: Kfb in every stitch. You will have 16 sts.
3. Rnd 2: Repeat k3, kfb around. You will have 20 sts.
4. Rnds 3 to 10: Knit 20 sts.
5. Rnd 11: Repeat k3, k2tog around. You will have 16 sts.
6. Change to oatmeal yarn.
7. Rnds 12 to 15: Knit 16 sts in oatmeal.
8. Rnd 16: Knit 16 sts in tan.
9. Rnds 17 to 21: Knit 16 sts in oatmeal.
10. Rnd 22: Knit 16 sts in tan.
11. Rnds 23 to 27: Knit 16 sts in oatmeal.
12. Rnd 28: Knit 16 sts in tan.
13. Rnds 29 and 30: Knit 16 sts in oatmeal.
14. Stuff the paw firmly and the upper arm lightly.
15. BO all stitches and leave a long sewing tail.

Flatten each arm opening. Attach the arms to opposite sides of the body immediately below the neck opening. Angle them downward by approximately 20 degrees. Make a small hidden stitch through the inside elbow and body to create the relaxed bent-arm position shown in the image.

Large Husky Head

The head is worked in marled gray and shaped as a broad oval. The center front should remain aligned with the center of the torso. White facial markings are added afterward with duplicate stitch and separately knitted pieces.

1. With marled gray yarn, CO 8 sts and join in the round.
2. Rnd 1: Kfb in every stitch. You will have 16 sts.
3. Rnd 2: Repeat k1, kfb around. You will have 24 sts.
4. Rnd 3: Repeat k2, kfb around. You will have 32 sts.
5. Rnd 4: Repeat k3, kfb around. You will have 40 sts.
6. Rnd 5: Repeat k4, kfb around. You will have 48 sts.
7. Rnd 6: Repeat k5, kfb around. You will have 56 sts.
8. Rnd 7: Repeat k6, kfb around. You will have 64 sts.
9. Rnd 8: Repeat k7, kfb around. You will have 72 sts.
10. Rnds 9 to 23: Knit 72 sts.
11. Mark the center front stitch between stitches 36 and 37. This point guides the blaze, eyes, muzzle, and nose.
12. Rnd 24: Repeat k7, k2tog around. You will have 64 sts.
13. Rnd 25: Knit 64 sts.
14. Rnd 26: Repeat k6, k2tog around. You will have 56 sts.
15. Rnd 27: Knit 56 sts.
16. Rnd 28: Repeat k5, k2tog around. You will have 48 sts.
17. Rnd 29: Knit 48 sts.
18. Rnd 30: Repeat k4, k2tog around. You will have 40 sts.
19. Insert the blue safety eyes before closing. Place them between Rnds 17 and 18, nine stitches to the left and nine stitches to the right of the center front line.
20. Place a thin white felt circle behind each eye before attaching the washer. The felt should create a narrow white rim around the blue iris.
21. Stuff the head firmly, adding small pieces around the eyes and sides to preserve the rounded shape.
22. Rnd 31: Repeat k3, k2tog around. You will have 32 sts.
23. Rnd 32: Repeat k2, k2tog around. You will have 24 sts.
24. Add the final stuffing. Keep the lower face slightly fuller than the crown.
25. Rnd 33: Repeat k1, k2tog around. You will have 16 sts.
26. Rnd 34: K2tog around. You will have 8 sts.
27. Cut the yarn, pull it through the remaining stitches, close tightly, and secure.

📌Thank you for reading the article

White Forehead Blaze

Use white yarn and duplicate stitch over the gray head. Begin at the cast-on crown and work downward along the marked center front. Keep the blaze symmetrical and wider above the eyes than beside the muzzle.

• Cover one center stitch on Rnds 4 and 5.
• Cover three centered stitches on Rnds 6 and 7.
• Cover five centered stitches on Rnds 8 to 11.
• Cover seven centered stitches on Rnds 12 to 15.
• Cover five centered stitches on Rnds 16 to 19.
• Cover three centered stitches on Rnds 20 to 23.
• Blend the lower three stitches beneath the top edge of the knitted muzzle.

Add scattered charcoal duplicate stitches over the gray crown, temple areas, and outer cheeks. Keep the blaze completely white. Concentrate darker markings around the outer eye corners and along the bases of the ears.

White Muzzle

1. With white yarn, CO 8 sts and join in the round.
2. Rnd 1: Kfb in every stitch. You will have 16 sts.
3. Rnd 2: Repeat k1, kfb around. You will have 24 sts.
4. Rnd 3: Repeat k2, kfb around. You will have 32 sts.
5. Rnds 4 to 8: Knit 32 sts.
6. Rnd 9: Repeat k2, k2tog around. You will have 24 sts.
7. Rnd 10: Knit 24 sts.
8. BO loosely and leave a long sewing tail.

Stuff the muzzle lightly, shaping it into a horizontal oval measuring approximately 3 inches or 7.5 centimeters wide. Center it beneath the eyes with its upper edge overlapping the lowest portion of the forehead blaze.

Sew the muzzle in place using small mattress stitches. Before closing the final inch, add a small amount of stuffing beneath the center so the nose projects naturally without making the muzzle excessively round.

Knitted Black Nose

1. With black yarn and smaller needles, CO 6 sts.
2. Row 1: Knit 6 sts.
3. Row 2: Kfb, k4, kfb. You will have 8 sts.
4. Rows 3 and 4: Knit 8 sts.
5. Row 5: Ssk, k4, k2tog. You will have 6 sts.
6. Row 6: Ssk, k2, k2tog. You will have 4 sts.
7. BO and gather the outer edge into a rounded triangular shape.

Position the nose at the upper center of the muzzle. Sew it securely and add one short vertical black line beneath it. Divide the line into a shallow upside-down Y to create the mouth.

Pointed Ears

Outer Ear Pieces

Make two outer ears in charcoal. These pieces create the strong black outline visible around the gray inner ear.

1. CO 18 sts.
2. Rows 1 to 4: Knit all 18 sts.
3. Row 5: Ssk, knit to the final 2 sts, k2tog. You will have 16 sts.
4. Row 6: Knit 16 sts.
5. Repeat Rows 5 and 6 six more times, decreasing two stitches on every RS row.
6. When 4 sts remain, work ssk, k2tog. You will have 2 sts.
7. On the next row, k2tog, cut the yarn, and pull it through the final stitch.

Inner Ear Pieces

Make two inner ears in pale gray.

1. CO 12 sts.
2. Rows 1 to 3: Knit 12 sts.
3. Row 4: Ssk, knit to the final 2 sts, k2tog. You will have 10 sts.
4. Row 5: Knit 10 sts.
5. Repeat Rows 4 and 5 three more times.
6. When 4 sts remain, work ssk, k2tog.
7. On the next row, k2tog and fasten off.

Center each inner ear on an outer ear, leaving an even charcoal border. Sew around the inner edge with matching yarn. Fold the lower outer-ear corners slightly inward and stitch them together to create a shallow curved base.

Attach the ears to the head across Rnds 7 to 12. Position them approximately 2.5 inches or 6 centimeters apart at their inner bases. Angle the tips outward by about 15 degrees and slightly backward.

White Cheek Fluff

Make two white cheek panels. These pieces create the soft triangular fur extending from the sides of the muzzle toward the neck.

1. CO 10 sts in white.
2. Row 1: Knit 10 sts.
3. Row 2: Kfb, knit to the final stitch, kfb. You will have 12 sts.
4. Row 3: Knit 12 sts.
5. Repeat Rows 2 and 3 twice more. You will have 16 sts.
6. Rows 8 to 12: Knit 16 sts.
7. Row 13: Ssk, knit to the final 2 sts, k2tog. You will have 14 sts.
8. Row 14: Knit 14 sts.
9. Repeat Rows 13 and 14 until 8 sts remain.
10. BO all 8 sts.

📌Thank you for reading the article

Pin one panel on each side of the muzzle. The wider edge should sit below the outer eye, and the narrow edge should point toward the neck. Sew around the edges, lightly stuff the upper half, and gently brush the surface to create soft fur.

Fluffy Neck Ruff

1. With white yarn, CO 48 sts and join in the round.
2. Rnd 1: Knit 48 sts.
3. Rnd 2: Repeat k1, make one loop stitch around.
4. Rnd 3: Knit 48 sts.
5. Rnd 4: Repeat one loop stitch, k1 around.
6. Rnd 5: Knit 48 sts.
7. Rnd 6: Repeat k1, make one loop stitch around.
8. Rnd 7: Knit 48 sts.
9. BO loosely.

For each loop stitch, insert the needle as if to knit, wrap the working yarn around your left index finger to form a 0.75-inch or 2-centimeter loop, knit the stitch, and pull the loop snugly against the fabric.

Place the ruff around the neck seam after attaching the head. Trim or brush the loops until they form a soft uneven collar extending farther at the front and sides than at the back.

Tail

The tail is thick at the base, tapered at the tip, and curved beside the right leg. Use alternating gray, black, and white sections with scattered duplicate-stitch markings.

1. With charcoal yarn, CO 8 sts and join in the round.
2. Rnd 1: Kfb in every stitch. You will have 16 sts.
3. Rnd 2: Repeat k1, kfb around. You will have 24 sts.
4. Rnds 3 to 6: Knit 24 sts in charcoal.
5. Rnds 7 to 11: Change to marled gray and knit 24 sts.
6. Rnds 12 to 15: Change to white and knit 24 sts.
7. Rnds 16 to 22: Change to marled gray and knit 24 sts.
8. Rnd 23: Repeat k4, k2tog around. You will have 20 sts.
9. Rnds 24 to 29: Knit 20 sts in marled gray.
10. Rnds 30 to 33: Knit 20 sts in white.
11. Rnd 34: Repeat k3, k2tog around. You will have 16 sts.
12. Rnds 35 to 39: Knit 16 sts in charcoal.
13. Stuff the tail lightly as you work, leaving it flexible enough to curve.
14. Rnd 40: K2tog around. You will have 8 sts.
15. Pull the yarn through the remaining stitches and close.

Add small charcoal duplicate stitches over the gray sections and small gray markings over the white sections. Attach the wide end to the right rear of the body. Curve the tail forward beside the right hip and secure one hidden stitch near the tip.

Patterned Field Shorts

Make the shorts before permanently attaching the legs if possible. The garment forms the olive, teal, rust, and cream patterned section around the lower body.

1. With olive yarn, CO 60 sts and join in the round.
2. Rnds 1 to 4: Repeat k1, p1 around.
3. Rnds 5 to 7: Knit 60 sts in olive.
4. Rnd 8: Knit 60 sts in cream.
5. Rnd 9: Repeat k2 teal, k2 olive, k2 rust, k2 olive, k2 cream, k2 olive five times.
6. Rnd 10: Repeat k1 teal, k2 cream, k1 teal, k2 olive, k1 rust, k2 cream, k1 rust, k2 olive five times.
7. Rnd 11: Repeat k2 teal, k2 olive, k2 rust, k2 olive, k2 cream, k2 olive five times.
8. Rnd 12: Knit 60 sts in muted teal.
9. Rnd 13: Repeat k5 teal, k1 copper six times, then repeat the same sequence four additional times.
10. Rnd 14: Repeat k4 teal, k3 copper, k5 teal five times.
11. Rnd 15: Repeat k3 teal, k5 copper, k4 teal five times.
12. Rnd 16: Repeat k4 teal, k3 copper, k5 teal five times.
13. Rnd 17: Repeat k5 teal, k1 copper, k5 teal, k1 cream five times.
14. Rnd 18: Knit 60 sts in olive.
15. Rnd 19: Knit 60 sts in olive.
16. BO loosely.

Slide the shorts over the lower body with the ribbing at the waist. Position the copper motif at the center front. Secure the upper edge invisibly beneath the vest and tack the lower edge beside each leg.

Olive Book Vest

The vest is worked flat in one piece from the lower edge to the armholes. Four garter-stitch edge stitches create the front bands. The lower fronts receive embroidered books, leaves, and small botanical symbols.

1. With olive yarn, CO 64 sts.
2. Rows 1 to 4: Knit all 64 sts.
3. Row 5 RS: K4, knit to the final 4 sts, k4.
4. Row 6 WS: K4, purl to the final 4 sts, k4.
5. Row 7 buttonhole row: K1, yo, k2tog, k1, knit to the final 4 sts, k4.
6. Row 8: K4, purl to the final 4 sts, k4.
7. Rows 9 to 12: Repeat Rows 5 and 6 twice.
8. Row 13: Repeat the buttonhole row.
9. Rows 14 to 18: Continue in stockinette with four garter stitches at each edge.
10. Row 19: Repeat the buttonhole row.
11. Rows 20 to 24: Continue in pattern.
12. Row 25: Repeat the buttonhole row.
13. Row 26: K4, purl to the final 4 sts, k4.
14. Row 27 RS: Knit 14 sts, BO 4 sts, knit 28 sts, BO 4 sts, knit the final 14 sts.

📌Thank you for reading the article

Right Front

1. Work only the first group of 14 sts.
2. Row 28 WS: Purl 10, k4.
3. Row 29 RS: K4, ssk, knit to the end. You will have 13 sts.
4. Row 30: Purl to the final 4 sts, k4.
5. Repeat Rows 29 and 30 five more times. You will have 8 sts.
6. Work straight in stockinette, maintaining the four-stitch garter band, until Row 42 is complete.
7. BO the remaining 8 shoulder sts.

Back

1. Return the center 28 sts to the needles.
2. Work Rows 28 to 42 in stockinette stitch.
3. BO all 28 sts on Row 43.
4. Mark the center 12 bound-off stitches as the back neckline.

Left Front

1. Return the final 14 sts to the needles.
2. Row 28 WS: K4, purl to the end.
3. Row 29 RS: Knit to the final 6 sts, k2tog, k4. You will have 13 sts.
4. Row 30: K4, purl to the end.
5. Repeat Rows 29 and 30 five more times. You will have 8 sts.
6. Work straight until Row 42 is complete.
7. BO the remaining 8 shoulder sts.

Sew each 8-stitch front shoulder to the corresponding outer 8 stitches of the back. Leave the central 12 back stitches open for the neck. Lightly block the vest before adding the motifs.

Book Motifs

Use duplicate stitch on the lower right front. Count motif stitches from the center opening edge, excluding the four-stitch garter band.

• Rust book: Cover motif stitches 2 to 4 on Rows 9 to 17 in rust. Fill the center column on Rows 10 to 16 with cream.
• Mustard book: Cover motif stitches 5 to 7 on Rows 7 to 16 in mustard. Fill the center column on Rows 8 to 15 with pale gray.
• Cream book: Cover motif stitches 8 to 11 on Rows 10 to 18 in cream. Add brown duplicate stitches along both vertical edges.
• Small brown book: Cover motif stitches 12 and 13 on Rows 12 to 18 in brown. Add one cream horizontal stitch on Row 15.
• Embroider two tiny horizontal page lines across each cream book center.

Leaf Motif

Place the main rust leaf on the upper left front, approximately 1 inch or 2.5 centimeters below the V-neck.

• Work one rust stitch on the center column of motif Row 1.
• Work three centered rust stitches on motif Row 2.
• Work five centered rust stitches on motif Rows 3 and 4.
• Work three centered rust stitches on motif Row 5.
• Work one centered rust stitch on motif Row 6.
• Embroider a brown vertical stem through the center.
• Add two small mustard French knots beside the leaf.

Sew four bronze buttons to the left front band opposite the buttonholes. Close the vest around the body and make one hidden stitch at each armhole so the garment remains correctly positioned.

Botanical Satchel

Front Panel

1. With oatmeal yarn and smaller needles, CO 28 sts.
2. Rows 1 to 4: Knit all sts.
3. Row 5 RS: Knit 28 sts.
4. Row 6 WS: Purl 28 sts.
5. Repeat Rows 5 and 6 until 30 rows are complete.
6. Rows 31 and 32: Knit all sts.
7. BO all stitches.

Back and Flap

1. CO 28 sts in oatmeal.
2. Work 32 rows exactly as for the front panel.
3. Continue for the flap.
4. Row 33 RS: Ssk, knit to the final 2 sts, k2tog. You will have 26 sts.
5. Row 34 WS: Purl 26 sts.
6. Repeat Rows 33 and 34 four more times. You will have 18 sts.
7. Rows 43 to 48: Work in stockinette.
8. Rows 49 and 50: Knit all stitches.
9. BO all 18 sts.

Gusset

1. With brown yarn, CO 6 sts.
2. Knit every row until the strip fits around one side, the bottom, and the opposite side of the panels. Approximately 90 rows should be sufficient.
3. BO all 6 sts.
4. Sew the gusset around the front panel, then attach the back panel to the opposite edge.

📌Thank you for reading the article

Satchel Flap Pattern

Add the botanical design with duplicate stitch and embroidery.

• Work a rust zigzag border two stitches inside the flap edge.
• Place one sage stem at the flap center, extending upward for eight rows.
• Add three pairs of rust leaves, each leaf covering two stitches.
• Add two cream flowers with mustard French-knot centers.
• Sew the small button to the bag front and make a three-strand yarn loop beneath the flap.

Long Shoulder Strap

1. With brown yarn, CO 5 sts on double-pointed needles.
2. Knit 5 sts. Slide the stitches to the opposite needle tip without turning.
3. Pull the yarn firmly across the back and knit the 5 sts again.
4. Continue the five-stitch I-cord for approximately 180 rows or until it measures 25 inches or 64 centimeters.
5. BO and sew one end to each upper side of the satchel.

Place the strap over the husky’s left shoulder so it crosses the vest diagonally and the satchel rests beside the right hip. Tack the strap behind the shoulder and beside the bag to prevent movement.

Compass Charm

1. With mustard yarn and smaller needles, CO 6 sts and join in the round.
2. Rnd 1: Kfb around. You will have 12 sts.
3. Rnds 2 and 3: Knit 12 sts.
4. Rnd 4: K2tog around. You will have 6 sts.
5. Insert a tiny amount of stuffing and close the opening.

Embroider a small brown four-point star on one side and add a short cream center line. Attach the charm to the lower portion of the satchel strap with a loop of brown yarn.

Explorer Hat

The hat has a rounded oatmeal crown, a geometric band, and a wide softly shaped brim. It is displayed beside the husky but can also rest loosely over the ears.

1. With oatmeal yarn, CO 8 sts and join in the round.
2. Rnd 1: Kfb around. You will have 16 sts.
3. Rnd 2: Repeat k1, kfb around. You will have 24 sts.
4. Rnd 3: Repeat k2, kfb around. You will have 32 sts.
5. Rnd 4: Repeat k3, kfb around. You will have 40 sts.
6. Rnd 5: Repeat k4, kfb around. You will have 48 sts.
7. Rnd 6: Repeat k5, kfb around. You will have 56 sts.
8. Rnd 7: Repeat k6, kfb around. You will have 64 sts.
9. Rnd 8: Repeat k7, kfb around. You will have 72 sts.
10. Rnds 9 to 13: Knit 72 sts in oatmeal.
11. Rnd 14: Repeat k2 gray, k2 oatmeal, k2 brown, k2 oatmeal, k2 gray, k2 oatmeal six times.
12. Rnd 15: Repeat k1 gray, k2 cream, k1 gray, k2 brown, k2 oatmeal, k1 gray, k2 cream, k1 gray six times.
13. Rnd 16: Repeat k2 gray, k2 oatmeal, k2 brown, k2 oatmeal, k2 gray, k2 oatmeal six times.
14. Rnd 17: Knit 72 sts in rust.
15. Rnds 18 to 20: Knit 72 sts in oatmeal.
16. Rnd 21: Repeat k5, kfb around. You will have 84 sts.
17. Rnd 22: Knit 84 sts.
18. Rnd 23: Repeat k6, kfb around. You will have 96 sts.
19. Rnd 24: Knit 96 sts.
20. Rnd 25: Repeat k7, kfb around. You will have 108 sts.
21. Rnds 26 to 30: Knit 108 sts.
22. Rnd 31: Purl 108 sts to form a turning ridge.
23. Rnds 32 and 33: Knit 108 sts.
24. BO loosely.

Steam the brim lightly without pressing it flat. Shape the front and back downward while leaving the side edges slightly raised. Add a thin brown I-cord around the base of the crown.

Braided Sandals

Make four sole pieces so each sandal has a double-layered sole.

1. With tan yarn and smaller needles, CO 6 sts.
2. Row 1: Knit 6 sts.
3. Row 2: Kfb, k4, kfb. You will have 8 sts.
4. Row 3: Knit 8 sts.
5. Row 4: Kfb, k6, kfb. You will have 10 sts.
6. Rows 5 to 16: Knit 10 sts.
7. Row 17: Ssk, k6, k2tog. You will have 8 sts.
8. Row 18: Knit 8 sts.
9. Row 19: Ssk, k4, k2tog. You will have 6 sts.
10. BO all stitches.

Place two sole pieces together and sew around the edge. Insert a very thin layer of stuffing before closing. Repeat for the second sandal.

Crossed Straps

1. Make four three-stitch I-cords, each 34 rows long.
2. Attach one cord from the outer rear edge of the sole to the inner front edge.
3. Cross the second cord over it from the inner rear edge to the outer front edge.
4. Repeat for the second sandal.
5. Make two additional three-stitch I-cords, each 10 rows long, and form a small toe loop on each sandal.

Place the sandals beneath the black feet and sew them discreetly through the soles. Keep the toe lines visible between the crossed straps.

Tiny Carrot Decorations

1. With orange yarn, CO 4 sts.
2. Row 1: Purl 4 sts.
3. Row 2: Ssk, k2tog. You will have 2 sts.
4. Row 3: K2tog and fasten off.
5. With green yarn, make a three-stitch I-cord for 4 rows.
6. Fold the green cord into two short leaves and sew it to the top of the carrot.

Make two carrots and attach one to the outer upper strap of each sandal.

Miniature Flora Field Guide

Book Covers

Make two matching oatmeal rectangles.

1. CO 16 sts with oatmeal yarn.
2. Rows 1 to 3: Knit 16 sts.
3. Row 4 RS: Knit 16 sts.
4. Row 5 WS: Purl 16 sts.
5. Repeat Rows 4 and 5 until 18 rows are complete.
6. Rows 19 and 20: Knit 16 sts.
7. BO all stitches.

Page Block

1. With pale cream yarn, CO 14 sts.
2. Knit 16 rows.
3. BO all stitches.
4. Make three identical page pieces.
5. Stack the page pieces and sew around three edges with pale gray thread.

Spine

1. With rust yarn, CO 4 sts.
2. Knit 20 rows.
3. BO all stitches.
4. Sew one long edge to the front cover and the opposite long edge to the back cover.
5. Insert the page block between the covers and secure it along the spine.

Backstitch the word Flora across the upper half of the front cover using brown thread. Beneath the word, embroider three slender green stems, one orange flower, one rust flower, and several small sage leaves.

Add a rust outline around the front and back covers. Shape the book so it remains slightly open when displayed beside the magnifying glass.

Magnifying Glass

Handle

1. With brown yarn and smaller needles, CO 5 sts.
2. Work a five-stitch I-cord for 24 rows.
3. BO and insert a narrow piece of craft wire through the center of the cord.
4. Bend the upper wire end into a small hook for attachment to the circular frame.

Lens Frame

1. Form bronze craft wire into a circle measuring approximately 1.4 inches or 3.5 centimeters across.
2. Place the clear plastic lens inside the circle and secure it with transparent craft adhesive.
3. With pale gray yarn, work a three-stitch I-cord for approximately 72 rows.
4. Wrap the I-cord around the wire frame and sew the ends together.
5. Attach the frame securely to the wired handle.

Display the magnifying glass beside the Flora field guide or tuck it beneath the satchel flap.

Round Botanist Glasses

Form two bronze wire circles, each approximately 1.35 inches or 3.4 centimeters across. Join them with a 0.5-inch or 1.3-centimeter bridge. Add two side arms measuring approximately 2.25 inches or 5.5 centimeters.

Wrap the wire lightly with a single strand of brown embroidery thread. Position the lenses around the blue eyes and rest the side arms above the white cheek fluff. Secure each side arm with one hidden thread loop behind the ear.

Tiny Ear Pencil

1. With brown yarn and smaller needles, CO 3 sts.
2. Work a three-stitch I-cord for 22 rows.
3. Change to tan and work 3 rows.
4. Change to charcoal and work 1 row.
5. Cut the yarn and pull it through all 3 sts.

Tuck the pencil diagonally behind the husky’s left ear. The dark tip should point toward the center of the forehead. Secure it with one brown thread stitch at the ear base.

Final Assembly and Facial Detailing

1. Sew the head to the 24-stitch neck opening, tilting the muzzle forward very slightly.
2. Wrap the white ruff around the seam and secure it at the center back.
3. Confirm that the ears remain symmetrical and the glasses sit level.
4. Embroider a thin charcoal upper eyelid above each blue eye.
5. Add three short black eyelashes at each outer eye corner.
6. Use fine gray thread to add three whiskers on each side of the muzzle.
7. Brush the white cheeks and ruff gently until they appear soft and full.
8. Fasten the vest, position the satchel, and arrange the arms beside the bag.
9. Place the hat, Flora guide, and magnifying glass beside the seated husky.

Care Notes

Keep the finished husky away from open flames, high heat, moisture, and direct sunlight. The wire glasses and magnifying glass are decorative components and should be handled gently. This design is best displayed as a collectible rather than used as an unsupervised toy.

Quick Checklist Before You Finish

• Both eyes are level and equally spaced from the center blaze.
• The muzzle is centered and the nose points straight forward.
• The ears tilt outward at matching angles.
• The arms and legs are attached securely.
• The tail curves forward beside the right hip.
• The vest buttons align with all four buttonholes.
• The satchel rests at the right hip with the strap crossing the chest.
• The sandals fit closely around the black feet.
• All loose yarn tails and embroidery knots are hidden.

Detailed Cleaning and Preservation Guidelines

Remove the glasses, hat, field guide, and magnifying glass before cleaning. Spot-clean the knitted pieces with cool water and a small amount of gentle wool-safe soap. Dab rather than rub the surface so the duplicate-stitch markings remain smooth.

Press the cleaned area between two dry towels and reshape it by hand. Allow the husky and accessories to air-dry completely in a well-ventilated shaded location. Do not machine wash, tumble dry, bleach, iron, or twist the knitted fabric.

For long-term storage, wrap the husky loosely in acid-free tissue and place it inside a breathable box. Store the glasses separately so the wire does not press against the face. Reposition the arms, legs, ears, and tail occasionally to protect their shape.