Bluebell Capelet Cottage Bunny – Knitting

Meet a soft cottage-style bunny dressed for a breezy woodland stroll, with a blue dress, a lacy capelet, and cozy lace-up shoes. This project is perfect if you love shopping for quality DK yarn, smooth interchangeable needle sets, sturdy toy stuffing, and tiny doll accessories that photograph beautifully. You’ll knit the bunny’s body in the round for a seamless look, then add garments with delicate eyelets that match the image. The set also includes an acorn drawstring bag, a mini notebook, a tiny pencil, and a sweet little squirrel friend in a bonnet and capelet.

Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.

Pattern Overview

This pattern makes a large knitted bunny with long floppy ears, a beige bonnet with a softly turned brim, a blue lace capelet tied at the neck, and a simple blue dress with an eyelet band near the hem. The shoes are blue slippers with a pale sole and ribbon-style laces.

You will also knit a small squirrel companion wearing a cream bonnet, a tan capelet, and a cream dress with a soft speckled/flower-like band near the hem. Finally, you’ll knit a beige-and-brown acorn bag with a brown I-cord handle, plus a tiny notebook and pencil accessory.

Work carefully and stuff firmly. The clean shaping and neat finishing are what make this set match the photo.

Skill Level

• Confident beginner to intermediate
• Comfortable with knitting in the round, basic shaping, and simple lace eyelets
• Small parts and tidy finishing required for a polished toy look

Finished Size

• Large bunny: about 11–13 in (28–33 cm) tall from feet to top of head (not counting bonnet brim)
• Small squirrel: about 4–5 in (10–13 cm) tall
• Acorn bag: about 3–3.5 in (7.5–9 cm) tall

Size varies with yarn, needle choice, and stuffing firmness. The photo look comes from a slightly dense fabric and firm stuffing.

Materials

• Yarn (DK weight)
• Beige/tan DK: bunny body, bonnet (approx 120–160 g)
• Blue DK (main dress): medium denim/blue (approx 60–90 g)
• Light periwinkle DK (capelet): lighter blue than dress (approx 30–45 g)
• Brown DK: acorn cap, squirrel body/tail (approx 30–50 g)
• Cream DK: squirrel bonnet and dress (approx 20–35 g)
• Tan/olive DK: squirrel capelet (approx 10–20 g)
• Small scraps of muted pink and muted green (or a softly variegated yarn) for the squirrel dress band

• Needles
• US 2 (2.75 mm) and US 3 (3.25 mm) double-pointed needles or a 32–40 in circular for magic loop
• Optional: US 1 (2.25 mm) for very neat I-cords and ties
• Many makers prefer a smooth interchangeable needle set for small-circumference work

• Notions
• Toy stuffing (polyester fiberfill)
• Tapestry needle, stitch markers, scissors
• 2 small black safety eyes (8–10 mm) for bunny or black bead eyes (as seen in the photo)
• 2 tiny black bead eyes (4–6 mm) for squirrel
• Embroidery floss or yarn for noses/mouths (dark brown)
• Pale blue ribbon (1/8–1/4 in) for bunny shoe laces (optional, or knit I-cords instead)
• Small button (about 8–10 mm) for notebook closure (optional)

Gauge

Gauge is not critical, but fabric must be firm so stuffing does not show through. Aim for a dense stockinette:

• About 26–30 sts and 34–40 rnds = 4 in (10 cm) in stockinette, using US 2–3

If your fabric feels loose, go down a needle size.

Abbreviations

• k = knit
• p = purl
• st(s) = stitch(es)
• rnd = round
• RS/WS = right side / wrong side
• k2tog = knit 2 together
• ssk = slip, slip, knit
• m1L/m1R = make 1 left / make 1 right
• yo = yarn over
• sl = slip
• pm = place marker
• sm = slip marker
• BO = bind off
• CO = cast on
• I-cord = knitted cord

Construction Notes

The large bunny is knitted mostly in the round from the feet upward for a smooth, seam-minimal look. Arms, ears, and tail are knitted separately and sewn on. The dress is knitted separately and slipped onto the bunny, then the capelet and bonnet are added last.

Stuff as you go. The photo shows a firm, rounded silhouette with clean facial shaping, so do not under-stuff.

Whenever you see “adjust stuffing,” pause and check symmetry from all angles.

📌Thank you for reading the article

Large Bunny Body

Legs (make 2)

With beige DK and US 2 (2.75 mm), CO 24 sts. Join to work in the round, being careful not to twist. Place marker for beginning of rnd.

K all rnds for 14 rnds.

Shape ankle slightly for a gentle taper:

• Rnd 15: (k10, k2tog) twice = 22 sts
• Rnd 16–20: k all

Leg length should look like the photo: the dress covers the upper legs, and the shoes cover the feet, so keep legs neat and straight.

Break yarn, place sts on hold. Repeat for second leg, but do not break yarn after the last rnd.

Join Legs and Knit Body

With second leg still on needles, k across its 22 sts. Using backward loop, CO 6 sts (crotch bridge). Then k across first leg’s 22 sts. CO 6 sts again. You now have 56 sts total. Place a marker at the center of the back if desired.

K 10 rnds.

Create a gentle belly and chest curve (subtle shaping):

• Rnd 11: k all
• Rnd 12: (k13, m1R) four times = 60 sts
• Rnd 13–18: k all
• Rnd 19: (k13, m1R) four times = 64 sts
• Rnd 20–34: k all

At this point, begin stuffing the legs and lower body firmly. Make sure the “bridge” between the legs is filled so the bunny stands evenly.

Shape Upper Body and Neck

The bunny in the image has a softly rounded torso and a defined neck area that the capelet sits on. Add light shaping:

• Rnd 35: (k14, k2tog) four times = 60 sts
• Rnd 36–41: k all
• Rnd 42: (k13, k2tog) four times = 56 sts
• Rnd 43–48: k all
• Rnd 49: (k12, k2tog) four times = 52 sts
• Rnd 50–54: k all

Stuff the torso firmly. The belly should be plump but not lumpy. Smooth the fabric with your hands as you add stuffing.

Form the neck:

• Rnd 55: (k11, k2tog) four times = 48 sts
• Rnd 56–60: k all

Place a marker here if you want a clear “neck line” for garment fitting later.

Large Bunny Head

Knit Head (attached)

Continue from neck. The head in the photo is round and slightly tall, with a gentle muzzle area defined by embroidery rather than heavy shaping.

• Rnd 1 (increase): (k7, m1R) six times = 54 sts
• Rnd 2: k all
• Rnd 3: (k8, m1R) six times = 60 sts
• Rnd 4–10: k all
• Rnd 11: (k9, m1R) six times = 66 sts
• Rnd 12–20: k all

Begin stuffing the head. Push stuffing into the sides to keep the face area smooth and rounded.

Place Eyes

The image shows small, dark eyes set wide and fairly low on the face. Place eyes between rnds 14 and 16 of the head section, about 12–13 sts apart.

If using safety eyes, insert them now before closing. If using beads, you can sew them later, but mark the spots with pins.

📌Thank you for reading the article

Close Head

Decrease smoothly for a rounded crown:

• Rnd 21: (k9, k2tog) six times = 60 sts
• Rnd 22: k all
• Rnd 23: (k8, k2tog) six times = 54 sts
• Rnd 24: k all
• Rnd 25: (k7, k2tog) six times = 48 sts
• Rnd 26: (k6, k2tog) six times = 42 sts
• Rnd 27: (k5, k2tog) six times = 36 sts
• Rnd 28: (k4, k2tog) six times = 30 sts
• Rnd 29: (k3, k2tog) six times = 24 sts
• Rnd 30: (k2, k2tog) six times = 18 sts

Stuff firmly to the very top. The head should feel solid and keep its shape when squeezed.

• Rnd 31: (k1, k2tog) six times = 12 sts
• Rnd 32: k2tog around = 6 sts

Break yarn, thread through remaining sts, pull tight, and secure. Weave in ends.

Large Bunny Arms (make 2)

With beige DK and US 2, CO 18 sts. Join to work in the round.

• Rnd 1–6: k all
• Rnd 7: (k7, k2tog) twice = 16 sts
• Rnd 8–18: k all

Lightly stuff the hand area first. Keep the upper arm less stuffed so it lies nicely at the bunny’s sides like in the photo.

• Rnd 19: (k6, k2tog) twice = 14 sts
• Rnd 20–28: k all

Break yarn leaving a long tail. Flatten the top opening and whipstitch closed. Use the tail for sewing the arm to the body.

Large Bunny Ears (make 2)

The photo shows long floppy ears that fall down beside the face under the bonnet. Knit ears flat for a natural drape, then seam.

Ear (flat)

With beige DK and US 2, CO 22 sts.

• Row 1 (RS): k all
• Row 2 (WS): p all
• Repeat these 2 rows for 34 rows total

Shape the tip gently:

• Row 35 (RS): k1, ssk, k16, k2tog, k1 (20 sts)
• Row 36 (WS): p all
• Row 37: k1, ssk, k14, k2tog, k1 (18 sts)
• Row 38: p all
• Row 39: k1, ssk, k12, k2tog, k1 (16 sts)
• Row 40: p all
• Row 41: k1, ssk, k10, k2tog, k1 (14 sts)
• Row 42: p all
• Row 43: k1, ssk, k8, k2tog, k1 (12 sts)
• Row 44: p all
• Row 45: k1, ssk, k6, k2tog, k1 (10 sts)
• Row 46: p all
• Row 47: k1, ssk, k4, k2tog, k1 (8 sts)
• Row 48: p all
• Row 49: k1, ssk, k2, k2tog, k1 (6 sts)
• Row 50: p all
• Row 51: k2tog, k2, k2tog (4 sts)
• Row 52: p all
• Row 53: k2tog twice (2 sts)
• Row 54: p2tog (1 st)

Break yarn and fasten off.

Fold ear lengthwise (WS together) and seam with mattress stitch along the long edge. Do not stuff. Repeat for second ear.

Large Bunny Tail

With beige DK, CO 12 sts and join in the round.

• Rnd 1: k all
• Rnd 2: (k1, m1R) around = 24 sts
• Rnd 3–6: k all
• Rnd 7: (k2, k2tog) around = 18 sts
• Rnd 8: k all
• Rnd 9: (k1, k2tog) around = 12 sts

Stuff lightly for a small rounded nub. Thread yarn through remaining sts, pull tight, and secure.

📌Thank you for reading the article

Blue Dress (Large Bunny)

The dress in the photo is a simple A-line with a smooth body and a lace eyelet band near the hem. Knit it in the round from the top down so it sits cleanly under the capelet.

Dress Yoke

With blue DK (darker blue than capelet) and US 3 (3.25 mm), CO 72 sts. Join to work in the round. Place marker.

• Rnd 1–4: k all
• Rnd 5: (k11, m1R) six times = 78 sts
• Rnd 6–10: k all

This creates a gentle upper fullness so the dress falls smoothly.

Underarm Openings

The bunny’s arms sit outside the dress. Create simple armholes by binding off a small section, then casting on again next round.

• Rnd 11: k24, BO 9 sts, k33, BO 9 sts, k3

You have two bound-off gaps. Next rnd, cast on to restore stitch count:

• Rnd 12: k24, CO 9, k33, CO 9, k3 = 78 sts

K 10 rnds.

Shape A-line Skirt

Increase gradually so the hem flares like in the image.

• Rnd 1: (k12, m1R) six times = 84 sts
• Rnd 2–6: k all
• Rnd 7: (k13, m1R) six times = 90 sts
• Rnd 8–12: k all
• Rnd 13: (k14, m1R) six times = 96 sts
• Rnd 14–20: k all

Try the dress on the bunny. The hem should sit just above the shoes, with the lace band visible near the bottom as in the photo.

Lace Band Near Hem

This eyelet motif creates the diamond openings you see around the bottom of the dress. Work carefully and keep yarn overs neat.

Set-up rnd: k all.

Pattern rnd A: (k6, yo, k2tog, k2, ssk, yo, k6) repeat around.

Pattern rnd B: k all (knit yarn overs as normal).

Pattern rnd C: (k5, yo, k2tog, k4, ssk, yo, k5) repeat around.

Pattern rnd D: k all.

Work rnds A–D twice total. This produces a repeating openwork band similar in scale to the image.

Dress Hem

• Rnd 1: k all
• Rnd 2: p all
• Rnd 3: k all

BO loosely. Weave in ends on the inside. Slip dress onto bunny from feet upward.

Lace Capelet (Large Bunny)

The capelet in the photo is a light blue semicircle with eyelets and a neck tie. Knit flat from the neck outward for easy shaping, then add cords.

Capelet Neck Edge

With light periwinkle DK and US 3, CO 72 sts. Work flat.

• Row 1 (RS): k all
• Row 2 (WS): p all
• Row 3: k all
• Row 4: p all

This creates a simple garter/stockinette mix that keeps the neck edge stable under the bow tie.

📌Thank you for reading the article

Shape and Eyelets

Increase at both ends to form a gentle cape curve.

• Row 5 (RS): k1, m1L, k to last st, m1R, k1
• Row 6 (WS): p all
• Repeat Rows 5–6 four more times (you add 10 sts total) = 82 sts

Now add eyelet motifs similar to the photo. Keep the center back smooth and place lace groups across.

Lace Row (RS): k3, (yo, k2tog, k3) repeat until last 5 sts, yo, k2tog, k4.

WS Row: p all.

Work the Lace Row + WS Row for 10 repeats total, maintaining k3 at each edge for a clean border.

Finish with 4 rows garter stitch (k all rows) for a neat lower edge that sits like the cape in the image.

BO loosely.

Capelet Ties

Make 2 ties in the same periwinkle yarn so the bow at the neck matches the photo.

• Knit I-cord: CO 3 sts. Slide sts to the other end of needle, pull yarn snug across back, k3. Repeat until cord measures 10–11 in (25–28 cm). BO.

Sew one tie to each front corner of the capelet neck edge. When tied, it should form a soft bow centered under the bunny’s chin.

Bonnet (Large Bunny)

The bonnet is beige with a soft turned brim framing the face, and it sits over the ears. The photo shows a slightly wavy brim and long ears tucked inside.

Bonnet Crown (flat)

With beige DK and US 2, CO 64 sts. Work flat.

• Row 1 (RS): k all
• Row 2 (WS): p all
• Repeat Rows 1–2 for 26 rows

This forms the back panel that covers the head.

Shape Top Curve

• Row 27 (RS): k1, ssk, k to last 3 sts, k2tog, k1 (62 sts)
• Row 28: p all
• Row 29: k1, ssk, k to last 3 sts, k2tog, k1 (60 sts)
• Row 30: p all
• Row 31: k1, ssk, k to last 3 sts, k2tog, k1 (58 sts)
• Row 32: p all

BO.

Seam Bonnet Back

Fold the bonnet panel in half (RS together) and seam the top/back curve with mattress stitch, leaving the bottom edge open. Turn RS out.

Pick Up for Brim

With RS facing, pick up and knit along the face opening edge (the bottom edge) evenly: about 72–80 sts, depending on your pickup rate. The goal is a gently flared brim.

Work in the round or flat; flat is easier for ties.

• Brim Row 1 (RS): k all
• Row 2 (WS): p all
• Row 3: k all
• Row 4: p all

Increase to create the turned brim:

• Row 5 (RS): (k8, m1R) repeat across
• Row 6: p all
• Row 7: k all
• Row 8: p all

Now create a fold line so the brim turns outward like in the image:

• Row 9 (RS): p all
• Row 10 (WS): k all

Work 6 more rows in stockinette (RS knit, WS purl). BO loosely.

Turn brim outward along the fold line. Tack in place with a few small stitches at the sides so it keeps the soft “bucket-bonnet” look from the photo.

📌Thank you for reading the article

Bonnet Ties

The photo shows a subtle tie line at the sides of the face. Use a blue accent tie to echo the outfit.

• With periwinkle yarn, make 2 I-cords, each 9–10 in (23–25 cm), as for capelet ties.

Sew one tie to each lower corner of the bonnet opening. Tie under the chin with a small bow.

Shoes (Large Bunny)

The shoes in the image are blue slippers with a pale sole and crisscross laces that tie into bows. Knit slippers, then thread ribbon through eyelets.

Slipper (make 2)

Sole: With beige DK and US 2, CO 10 sts. Work flat in garter stitch (k every row) for 18 rows. This makes a soft pale sole edge as seen under the shoe.

Do not break yarn. Pick up and knit around the sole: 10 along CO edge, 18 along side, 10 along BO edge, 18 along other side = 56 sts. Join to work in the round.

Upper: Switch to blue DK.

• Rnd 1–3: k all
• Rnd 4 (eyelets for laces): (k6, yo, k2tog) repeat around
• Rnd 5–8: k all

Toe shaping: Place marker at center front. Decrease around the front half to form a rounded toe.

• Rnd 9: k to 2 sts before marker, k2tog, sm, ssk, k to end
• Rnd 10: k all
• Repeat Rnds 9–10 four more times (reduce 10 sts) = about 46 sts

K 2 rnds. BO loosely. Fold the upper edge inward slightly and tack at the back if desired for a neat cuff.

Thread pale blue ribbon through the eyelets in a crisscross pattern and tie a bow on top, matching the photo.

Acorn Bag

The acorn bag in the photo has a beige lower body and a textured brown cap with a small stem and a handle. Knit it as a small pouch with a drawstring opening hidden under the cap.

Bag Body

With beige DK and US 2, CO 36 sts. Join in the round.

• Rnd 1–22: k all

Create a rounded base by decreasing the last rounds:

• Rnd 23: (k4, k2tog) repeat around = 30 sts
• Rnd 24: k all
• Rnd 25: (k3, k2tog) repeat around = 24 sts
• Rnd 26: k all
• Rnd 27: (k2, k2tog) repeat around = 18 sts
• Rnd 28: (k1, k2tog) repeat around = 12 sts
• Rnd 29: k2tog around = 6 sts

Break yarn, thread through sts, pull tight to close base. Turn RS out.

Bag Opening and Drawstring Channel

With beige DK, pick up and knit around the top opening edge (where you started). You should have 36 sts.

• Rnd 1: k all
• Rnd 2 (channel): (k2, yo, k2tog) repeat around
• Rnd 3–4: k all

BO. Thread a brown I-cord or twisted cord through the yo holes to cinch the bag.

Acorn Cap

With brown DK, CO 36 sts. Join in the round.

Work a textured cap to mimic the photo’s ridged top:

• Rnd 1: (k1, p1) repeat around
• Rnd 2: (p1, k1) repeat around
• Repeat Rnds 1–2 for 10 rnds

Shape the top:

• Rnd 11: (k4, k2tog) repeat around = 30 sts
• Rnd 12: k all
• Rnd 13: (k3, k2tog) repeat around = 24 sts
• Rnd 14: k all
• Rnd 15: (k2, k2tog) repeat around = 18 sts
• Rnd 16: (k1, k2tog) repeat around = 12 sts
• Rnd 17: k2tog around = 6 sts

Stuff lightly to keep shape, then close as before.

Stem

With brown DK, CO 6 sts. Join in the round.

• Rnd 1–4: k all

BO. Sew stem to cap top center.

Sew cap to bag body, aligning the cap edge so it sits like an acorn top. Leave enough looseness that the bag can still open when the drawstring is pulled.

Handle

Make a brown I-cord about 9–10 in (23–25 cm). Sew ends to the sides of the bag like in the photo, forming a loop handle.

Mini Notebook

The notebook in the photo is a tiny off-white booklet with a darker “spiral” look along one side and a small closure detail. Knit a small rectangle and add a contrasting edge.

Notebook Cover

With cream yarn and US 2, CO 18 sts. Work flat in garter stitch for 28 rows. BO.

Fold into a small booklet shape: bring the two short ends toward the center so it resembles a closed notebook.

With brown yarn, whipstitch along one long edge with visible loops to mimic the spiral binding.

Add a tiny button or stitched nub on the front, and a small loop of yarn as a “strap” if you want a closure like in the photo.

Mini Pencil

Create a tiny pencil with an I-cord body and a stitched tip.

• With blue yarn, knit an I-cord (3 sts) for about 2 in (5 cm). BO.
• With cream yarn, stitch a small cone at one end for the “wood” point.
• With dark yarn, add a tiny stitch for the “lead.”
• With pink yarn, wrap a few stitches at the other end for an eraser hint.

Small Squirrel Friend

The squirrel is a small knitted companion with a brown body, a big tail, a cream bonnet, a tan capelet tied at the neck, and a cream dress with a soft multicolor band. Keep everything small and tidy.

Squirrel Body (brown)

With brown DK and US 2, CO 18 sts. Join in the round.

• Rnd 1: (k2, m1R) repeat around = 27 sts
• Rnd 2–10: k all

Place tiny bead eyes between rnds 6–7, about 6 sts apart, low on the face. Embroider a small nose and simple mouth like the photo.

Shape the bottom and close:

• Rnd 11: (k7, k2tog) three times = 24 sts
• Rnd 12: k all
• Rnd 13: (k2, k2tog) repeat around = 18 sts
• Rnd 14: (k1, k2tog) repeat around = 12 sts

Stuff firmly, then k2tog around = 6 sts. Close and secure.

Squirrel Arms (make 2)

With brown DK, CO 10 sts. Join in the round.

• Rnd 1–8: k all

Lightly stuff hand end. Close opening, leaving a tail for sewing.

Squirrel Legs (make 2)

With brown DK, CO 12 sts. Join in the round.

• Rnd 1–10: k all

Stuff lightly and close. These are small and stubby in the image, so keep them short.

Squirrel Tail

With brown DK, CO 14 sts. Join in the round.

• Rnd 1: (k1, m1R) around = 28 sts
• Rnd 2–8: k all
• Rnd 9: (k5, k2tog) repeat around = 24 sts
• Rnd 10–14: k all

Stuff firmly near the base and lightly toward the tip. Close with decreases:

• Rnd 15: (k4, k2tog) repeat around = 20 sts
• Rnd 16: (k3, k2tog) repeat around = 16 sts
• Rnd 17: (k2, k2tog) repeat around = 12 sts
• Rnd 18: (k1, k2tog) repeat around = 8 sts
• Rnd 19: k2tog around = 4 sts

Close and secure. Sew tail to back of body, curving upward like in the photo.

Squirrel Dress

The squirrel dress is cream with a subtle multicolor band near the hem. The easiest way to match the look is to use a softly variegated yarn for the band or knit a simple dotted motif with tiny color pops.

Dress (top-down, in the round)

With cream yarn, CO 36 sts. Join in the round.

• Rnd 1–4: k all
• Rnd 5: (k5, m1R) six times = 42 sts
• Rnd 6–10: k all

Make small armholes by working a short gap like you did for the bunny dress:

• Rnd 11: k12, BO 4, k17, BO 4, k1
• Rnd 12: k12, CO 4, k17, CO 4, k1

K 6 rnds.

Flare skirt:

• Rnd 1: (k6, m1R) six times = 48 sts
• Rnd 2–6: k all
• Rnd 7: (k7, m1R) six times = 54 sts
• Rnd 8–10: k all

Soft “Flower Band” Near Hem

Work 4 rnds using either a variegated yarn or a simple dotted colorwork.

If using scraps, keep floats short and use tiny single-stitch accents:

• Band Rnd 1: *k6, k1 with pink, k2* repeat around
• Band Rnd 2: k all in cream
• Band Rnd 3: *k5, k1 with green, k3* repeat around
• Band Rnd 4: k all in cream

This creates scattered hints of color like the photo’s soft speckles.

Hem finish:

• Rnd 1: p all
• Rnd 2: k all
• Rnd 3: p all

BO loosely.

Squirrel Capelet

With tan/olive yarn, CO 44 sts. Work flat.

• Row 1: k all
• Row 2: p all
• Row 3: k1, m1L, k to last st, m1R, k1
• Row 4: p all

Repeat Rows 3–4 four more times (increase 10 sts total). Then work 6 rows in garter stitch for a soft drape like the photo’s small shawl.

BO. Add two short cream ties (I-cords or twisted yarn) to the top corners, and tie into a tiny bow under the squirrel’s chin.

Squirrel Bonnet

With cream yarn, CO 36 sts. Work flat in stockinette for 16 rows (RS knit, WS purl).

BO. Fold in half and seam the top/back like a small hood, leaving the face opening edge unseamed.

Pick up and knit along the face opening edge and work 4 rows garter stitch for a soft scalloped look. BO.

Add two cream ties and tie under the chin.

Assembly Order

1. Sew large bunny arms to the sides of the torso, slightly forward.
2. Sew ears to the head, positioned so they fall down the sides of the face.
3. Sew tail to back of bunny.
4. Slip on the blue dress, aligning armholes.
5. Put on the shoes and lace with ribbon, tying bows on top.
6. Place the capelet over the dress and tie a centered bow.
7. Fit the bonnet over the ears, turn the brim outward, and tie under the chin.
8. Assemble squirrel: sew arms, legs, and tail; then dress, capelet, and bonnet.
9. Finish accessories: acorn bag, mini notebook, and pencil.

Final Assembly and Facial Detailing

Embroider the bunny nose as a small vertical stitch with two angled stitches beneath, forming a soft “Y” shape like the photo. Keep it centered and low on the face. Add a short mouth line if desired, but keep it subtle.

For the squirrel, stitch a tiny triangle nose and a small smile. Use minimal stitches so the face stays sweet and simple.

Care Notes

Spot clean whenever possible. Use cool water and a mild soap, then press gently with a towel. Reshape while damp and allow to air dry fully. Avoid harsh agitation so the lace eyelets and small ties keep their shape.

Quick Checklist Before You Finish

• Eyes placed evenly and securely
• Head and body firmly stuffed and symmetrical
• Dress hem lace band centered and even
• Capelet bow centered under the chin
• Bonnet brim turned and lightly tacked at sides
• Shoes sit flat and laces form neat bows
• Squirrel tail curves upward like the photo
• All ends woven in and seams smooth

Detailed Cleaning and Preservation Guidelines

For long-term display, keep the set out of direct sun to reduce fading, especially on the blues. Store in a breathable cotton bag and avoid airtight plastic for extended periods. If you pack the items away, lightly stuff the dresses with tissue to protect the shape and prevent deep creases in the lace sections.