Fuchsia Cloud-Parasol Bunny – Knitting

This charming knitted bunny set is designed as a sweet collectible toy with a richly textured wardrobe and carefully coordinated accessories. The finished piece has the look of a premium handmade bunny doll, complete with a flower-covered dress, rounded beret, tiny shoes, purse, parasol, duck companion, and a small fuchsia spray. It is ideal for knitters who love heirloom nursery decor, boutique-style stuffed animals, and giftable knitted toys that feel refined, soft, and thoughtfully styled. Every element in this design is written to help you recreate the same balanced silhouette and polished finish shown in the image.

Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.

Pattern Overview

This pattern creates a standing bunny with a rounded head, long soft ears, a simple embroidered face, and a compact body hidden under a full fuchsia dress. The outfit includes a short capelet, a beret with leaf trim, matching Mary Jane shoes, a small purse, a pink parasol, a tiny duck friend wearing a floral bib and hat, and a separate flowering branch.

The bunny in the image has gentle proportions. The head is large but not oversized, the body is short and slightly weighted, and the legs are set close together so the skirt falls in a neat bell shape. The hands and feet are modest in scale, which keeps the whole toy soft, elegant, and childlike.

The surface knitting is smooth stockinette with very fine stitches. Most of the shaping is subtle. The style depends on clean decreases, careful stuffing, and neat assembly more than complex stitch patterns. The decorative flowers add the visual richness, so take your time with placement and make enough blossoms to keep the dress looking lush and layered.

Finished Size

• Main bunny: about 10 to 11 inches tall seated, about 12 inches tall standing including hat
• Duck companion: about 4 inches tall
• Parasol: about 5 inches long
• Purse: about 2 inches wide
• Flower spray: about 4 inches long

The exact size depends on yarn, needle size, and firmness of stuffing. To match the image, knit at a tight gauge so the toys look smooth and refined rather than loose or floppy.

Materials

• Main bunny yarn: light beige DK yarn for head, body, arms, legs, ears, hands, and feet
• Dress, capelet, shoes, parasol trim, and flowers: rich fuchsia or deep rose DK yarn
• Hat and purse: pale taupe or blush-beige DK yarn
• Leaf trim and stems: moss green and soft sage green DK yarn
• Duck body: pale buttery yellow DK yarn
• Duck beak and feet: muted orange DK yarn
• Duck bib: soft cream or white fingering or light DK yarn
• Flower centers: pale blush or cream embroidery thread, tiny beads, or French knots
• Needles: US 2 to US 3 double-pointed needles or preferred method for small circumference knitting
• Smaller needles: 1 size down for hat trim, leaves, and tiny details if desired
• Stuffing: soft polyester fiberfill
• Weighted filling: a small muslin bag of poly pellets for the bunny base if desired
• Craft wire: optional for parasol shaft only
• Thin wooden skewer or sturdy rod: optional core for parasol handle
• Tapestry needle
• Stitch markers
• Pins for assembly
• Black embroidery floss: face and duck eyes

Gauge

28 to 32 stitches and 38 to 42 rounds = 4 inches in stockinette worked in the round after light blocking.

Gauge matters because the toys must hold their shape. The dress should curve outward without drooping, the head should stay round, and the flowers should sit crisply on the surface.

Abbreviations

• CO = cast on
• K = knit
• P = purl
• st(s) = stitch(es)
• rnd = round
• RS = right side
• WS = wrong side
• inc = increase 1 stitch
• kfb = knit into front and back of same stitch
• m1 = make 1 increase
• k2tog = knit 2 stitches together
• ssk = slip, slip, knit
• ssk and k2tog are used to keep shaping balanced
• BO = bind off
• rep = repeat
• pm = place marker
• sm = slip marker

📌Thank you for reading the article

General Notes

• Work most toy pieces in the round for a smooth finish.
• Knit firmly to prevent stuffing from showing.
• Stuff gradually and shape often with your fingers.
• The bunny’s body is simple because the dress provides the outer silhouette.
• Do not overstuff the head. It should stay round, soft, and calm, not stretched.
• The ears should be lightly stuffed or unstuffed near the tips so they drape naturally under the beret.
• The flowers are essential to the look. Make enough to create a clustered, garden-like effect.

Main Bunny

Legs Make 2

Using light beige, CO 12 sts and join carefully to work in the round. Distribute evenly.

1. Rnds 1 to 4: K all sts.
2. Rnd 5: Kfb around. 24 sts.
3. Rnds 6 to 12: K all sts.
4. Rnd 13: K2, k2tog around. 18 sts.
5. Rnds 14 to 20: K all sts.

Stuff the lower foot firmly, especially the base. Flatten the underside slightly with your fingers so the finished toy can stand more neatly under the dress. Continue the leg for another 10 to 12 rounds, knitting straight to create a narrow ankle and calf.

Lightly stuff the upper leg. Bind off one leg. Leave the second leg on the needles.

Joining the Legs and Lower Body

Knit across the second leg, CO 4 stitches for the center join, knit across the first leg, CO 4 more stitches. 44 sts total.

Place the center front marker midway across one bridge and the center back marker across the opposite bridge.

1. Rnds 1 to 6: K all sts.
2. Rnd 7: K to 2 sts before side, k2tog, k to opposite side, ssk, repeat once more at back side points. 40 sts.
3. Rnds 8 to 12: K all sts.
4. Rnd 13: Rep decrease round. 36 sts.
5. Rnds 14 to 18: K all sts.

Add weighted filling to the base if using. Surround it with soft stuffing so the body remains smooth. Continue knitting straight for 8 more rounds. This section forms a compact torso hidden under the dress.

Upper Body and Neck

1. Next rnd: K all sts.
2. Next rnd: K4, k2tog around. 30 sts.
3. Next 4 rnds: K all sts.
4. Next rnd: K3, k2tog around. 24 sts.
5. Next 3 rnds: K all sts.
6. Next rnd: K2, k2tog around. 18 sts.
7. Next 2 rnds: K all sts.

Stuff firmly but not hard. The shoulder line should slope gently and remain smaller than the skirt area. This narrow neck helps the head sit close to the capelet as in the image.

Head

From the neck, begin head shaping.

1. Rnd 1: Kfb around. 36 sts.
2. Rnd 2: K all sts.
3. Rnd 3: K3, m1 around. 45 sts.
4. Rnd 4: K all sts.
5. Rnd 5: K4, m1 around. 54 sts.
6. Rnd 6: K all sts.
7. Rnd 7: K5, m1 around. 63 sts.
8. Rnds 8 to 24: K all sts.

Stuff the head gradually as you work. Shape a full rounded face, but keep the muzzle area slightly softer. The image shows a smooth oval head with no exaggerated cheeks. The face must look serene and balanced.

9. Next rnd: K5, k2tog around. 54 sts.
10. Next rnd: K all sts.
11. Next rnd: K4, k2tog around. 45 sts.
12. Next rnd: K all sts.
13. Next rnd: K3, k2tog around. 36 sts.
14. Next rnd: K all sts.
15. Next rnd: K2, k2tog around. 27 sts.
16. Next rnd: K1, k2tog around. 18 sts.

📌Thank you for reading the article

Finish stuffing. Close the top neatly, thread the yarn through remaining stitches, pull tight, and secure. Massage the head into a smooth oval. The widest point should be across the cheeks, with a gentle narrowing toward the crown.

Arms Make 2

Using light beige, CO 10 sts and join in the round.

1. Rnds 1 to 6: K all sts.
2. Rnd 7: Kfb around. 20 sts.
3. Rnds 8 to 10: K all sts.
4. Rnd 11: K2, k2tog around. 15 sts.
5. Rnds 12 to 24: K all sts.
6. Rnd 25: K1, k2tog around. 10 sts.
7. Rnds 26 to 28: K all sts.

Stuff the hand and lower forearm lightly. Leave the upper section almost unstuffed so the arms rest softly at the sides. Bind off and leave a long sewing tail.

The image shows short tapered arms that disappear slightly under the capelet. Keep them small and neat, not long or floppy.

Ears Make 2

Using light beige, work flat or in the round and seam later. Working flat gives a very controlled ear shape for this design.

1. CO 8 sts.
2. Rows 1 and 2: Knit.
3. Row 3: K1, inc, knit to last 2 sts, inc, K1. 10 sts.
4. Row 4: Knit.
5. Repeat the increase row every 4th row until you have 18 sts.
6. Work straight for 18 rows.
7. Then shape the tip: K1, ssk, knit to last 3 sts, k2tog, K1 on every RS row.
8. Work WS rows plain until 8 sts remain.
9. Continue decreases every RS row until 4 sts remain.
10. K2tog twice, then fasten off.

Make a second ear the same way. Fold each ear lengthwise very lightly and seam. Do not stuff the tips. Add only a trace of filling at the lower third if needed. The ears in the image hang down from beneath the hat and lie close to the head.

Facial Sculpting and Embroidery

Before attaching the ears, mark the eye positions. The eyes are small black ovals placed fairly wide apart, slightly above the midpoint of the face. They are simple and understated.

• Use black embroidery thread for the eyes.
• Stitch one small vertical satin-stitch oval on each side.
• Keep both eyes tiny. Large eyes will change the expression and lose the calm style shown in the image.

For the nose and mouth, embroider a small inverted Y shape centered low on the face. Begin with a short nose line, then split into two downturned lines for the mouth. The stitched muzzle is neat and narrow, not broad or cartoonish.

If desired, use one or two sculpting stitches to define a very gentle muzzle. Keep this subtle. The face should remain smooth.

Beret

Using pale taupe, CO 8 sts and join.

1. Rnd 1: Kfb around. 16 sts.
2. Rnd 2: K all sts.
3. Rnd 3: K1, m1 around. 24 sts.
4. Rnd 4: K all sts.
5. Rnd 5: K2, m1 around. 32 sts.
6. Rnd 6: K all sts.
7. Rnd 7: K3, m1 around. 40 sts.
8. Rnd 8: K all sts.
9. Rnd 9: K4, m1 around. 48 sts.
10. Rnd 10: K all sts.
11. Rnd 11: K5, m1 around. 56 sts.
12. Rnds 12 to 20: K all sts.

This creates the soft puffed crown. To shape the beret, begin decreasing.

13. Rnd 21: K5, k2tog around. 48 sts.
14. Rnd 22: K all sts.
15. Rnd 23: K4, k2tog around. 40 sts.
16. Rnds 24 to 26: K all sts.
17. Rnd 27: P all sts.
18. Rnd 28: K all sts.
19. Rnd 29: K all sts.
20. Rnd 30: BO loosely.

📌Thank you for reading the article

The hat should sit low on the head with a soft rounded top and a slight edge band. It is not a stiff cap. Position it slightly forward so the ears emerge beneath it.

Leaf Trim for Hat

Using moss green, make a cord long enough to travel across the front half of the hat. You may use I-cord, crochet chain, or a narrow knitted cord. Sew this cord along the hat front as a gentle curved vine.

For the leaves, make 2 small pointed leaves.

1. CO 3 sts.
2. Row 1: Knit.
3. Row 2: Kfb, K1, kfb. 5 sts.
4. Row 3: Knit.
5. Row 4: K1, kfb, K1, kfb, K1. 7 sts.
6. Rows 5 and 6: Knit.
7. Row 7: Ssk, K3, k2tog. 5 sts.
8. Row 8: Knit.
9. Row 9: Ssk, K1, k2tog. 3 sts.
10. Row 10: K3tog.

Sew the leaves overlapping near one side of the hat front, exactly as shown in the image.

Dress

The dress is the visual centerpiece. It is a rich fuchsia bell-shaped garment with a smooth stockinette body, soft fullness, and many clustered blossoms applied over the skirt. The waistline sits high under the capelet.

Work from the hem upward so the fullness is easy to control.

Skirt

Using fuchsia, CO 88 sts and join.

1. Rnds 1 to 6: K all sts.
2. Rnd 7: P all sts.
3. Rnds 8 to 20: K all sts.
4. Rnd 21: K9, k2tog around. 80 sts.
5. Rnds 22 to 28: K all sts.
6. Rnd 29: K8, k2tog around. 72 sts.
7. Rnds 30 to 36: K all sts.
8. Rnd 37: K7, k2tog around. 64 sts.
9. Rnds 38 to 44: K all sts.
10. Rnd 45: K6, k2tog around. 56 sts.
11. Rnds 46 to 50: K all sts.

The skirt should flare gently, not dramatically. It must skim over the body and stop above the shoes so the bunny’s feet remain visible.

Upper Dress

Continue with 56 sts.

1. Rnds 51 to 58: K all sts.
2. Rnd 59: K5, k2tog around. 48 sts.
3. Rnds 60 to 64: K all sts.
4. Rnd 65: P all sts.
5. Rnd 66: K all sts.
6. BO loosely.

This upper edge will sit under the capelet. Slip the dress onto the bunny before full finishing. Adjust the seam line or back opening as needed. You may add a small invisible back seam after dressing the toy.

If you prefer, work the dress flat with a back opening. In that case, add 2 selvage stitches and seam invisibly after dressing. The image hides the back, so either method works as long as the front remains smooth.

Small Front Underlayer

The image shows a slight inner triangular panel beneath the cape opening. To mimic this, knit a small narrow insert in fuchsia.

1. CO 10 sts.
2. Rows 1 to 12: Work in rib or tight stockinette.
3. Shape a gentle point by decreasing 1 stitch at each end every 4th row until 6 sts remain.
4. Work 4 more rows and bind off.

Sew this panel at the upper front center under the cape opening so it suggests a dress bodice.

📌Thank you for reading the article

Capelet

The capelet is short, rounded, and flower-trimmed. It sits at shoulder height and opens in the center front. Its curved lower edges frame the dress beautifully.

Work flat from the neck downward.

1. Using fuchsia, CO 36 sts.
2. Rows 1 to 4: K1, P1 rib or seed stitch border at edges with stockinette center.
3. Row 5 RS: K1, m1, knit to last st, m1, K1.
4. Row 6 WS: P all center sts, keep edge border neat.
5. Repeat these increase rows every 4th row until you have 48 sts.
6. Work 8 rows straight.

Divide for front opening and curved fronts.

7. Work 24 sts for first half and place remaining 24 on hold.
8. On each front half, decrease 1 stitch at neck edge every 4th row 5 times while continuing 1 increase at outer edge every 6th row 3 times.
9. Work until the cape reaches just below the shoulders of the bunny.
10. Bind off with a soft rounded lower edge.

Repeat for second half in mirror image. Sew shoulders lightly or attach directly around the neck opening. The cape should sit flat and rounded, not stiff. It should cover the shoulders and top of the upper arms, stopping well above the thickest flower clusters on the skirt.

Flowers for Dress and Cape

The blossoms create the signature look. The flowers are small, plump, and layered, clustered densely around the lower dress and more sparingly on the cape.

Make 28 to 36 small flowers for the dress and 6 to 8 for the cape. Some may be tiny buds instead of full flowers for variety.

Small Five-Petal Flower

1. Using fuchsia, CO 15 sts loosely.
2. Work one row knit.
3. Cut yarn, thread through all stitches, and gather tightly into a ring.
4. Shape the ring into 5 little petal bumps with small securing stitches on the back.

Alternative method: make an I-cord spiral and coil it into a flower. This works especially well for the puffier blossoms shown on the skirt. Use whichever technique gives a rounded, dimensional flower rather than a flat motif.

Tiny Bud

1. CO 4 sts in fuchsia.
2. Knit 3 rows.
3. K2tog twice.
4. Fasten off and gather into a bud.

Flower Centers

• Add one pale knot, tiny bead, or French knot to the center of selected flowers.
• Do not place centers on every blossom.
• The image mixes simple flowers with highlighted centers.

Placing the Flowers

Start with the skirt. Concentrate the fullest clusters around the lower half, especially near the hem and lower front. Add smaller groupings rising upward toward the waist. Avoid perfect symmetry. The image looks balanced, but naturally scattered.

On the capelet, sew 3 to 4 small blossom clusters on each side of the opening. Keep them vertical and slightly trailing downward. Add tiny olive or brownish-green stem knots beneath a few flowers to mimic the small stem details seen in the image.

Shoes Make 2

The bunny wears simple fuchsia Mary Jane shoes with a rounded toe and a narrow strap.

1. Using fuchsia, CO 10 sts.
2. Knit 2 rows flat.
3. Pick up stitches around to work in the round, forming a small oval sole of about 20 sts.
4. Knit 4 rounds.
5. Decrease around the toe over 3 rounds until the front gathers into a rounded shape.
6. Continue straight over the heel area for 3 rounds.
7. Bind off top opening.

For the strap, CO 8 sts or make a narrow cord. Sew one end to each side of the opening so the strap crosses the top of the foot. Slip the finished shoes onto the knitted feet and tack in place discreetly.

Purse

The purse is pale taupe and softly rounded, almost shell-shaped, with a slim loop handle.

1. Using pale taupe, CO 18 sts.
2. Work flat in stockinette for 10 rows.
3. Increase 1 stitch at each end every 4th row twice.
4. Work 8 more rows straight.
5. Decrease 1 stitch at each end every 4th row twice.
6. Bind off.

📌Thank you for reading the article

Make 2 identical pieces. Sew together around the curved edge, leaving the top open. Lightly stuff with a touch of filling so it stays plump.

For the handle, knit or make an I-cord long enough to form a small arch. Sew securely to the upper sides. Add one tiny decorative stitch at the top center if desired.

Parasol

The parasol is pale taupe with fuchsia edging and panels. It is small, delicate, and slightly tilted in the image.

Canopy

Make 6 wedge panels. Use pale taupe for the outer sections and fuchsia for alternate inner accents if desired.

1. CO 2 sts.
2. Increase 1 stitch at the beginning of every RS row until 12 sts.
3. Work 2 rows straight.
4. Bind off.

Sew the 6 wedges together into a shallow umbrella shape. Add a narrow fuchsia edge all around. The parasol should not be deeply domed.

Line the underside with a second, lighter canopy if you want extra structure, but keep the finished piece graceful and thin.

Handle

Cover a thin wire or skewer with tightly wrapped fuchsia yarn. Leave the upper end straight for inserting into the canopy. Curve the lower end into a hooked handle and stitch securely around it with yarn so the hook stays smooth and neat.

Attach the canopy to the shaft and add a tiny top knot or stitched nub at the center.

Duck Companion

The duck is tiny, soft yellow, and slightly chubby with a cream floral bib and a pale taupe hat. It should look sweet beside the bunny without competing for attention.

Duck Body

1. Using pale yellow, CO 12 sts and join.
2. Rnd 1: K all sts.
3. Rnd 2: Kfb around. 24 sts.
4. Rnds 3 to 8: K all sts.
5. Rnd 9: K3, k2tog around. 20 sts.
6. Rnds 10 to 14: K all sts.
7. Rnd 15: K2, k2tog around. 15 sts.
8. Rnd 16: K all sts.
9. Rnd 17: K1, k2tog around. 10 sts.

Stuff firmly but softly. Close the top. Shape the lower body slightly wider than the head so the duck stands in a pear-like form.

Duck Wings Make 2

1. Using pale yellow, CO 6 sts.
2. Work 8 rows stockinette.
3. Decrease 1 stitch at each end on next RS row.
4. Work 2 rows.
5. Bind off.

Sew flattened wings to the side body. Angle them slightly downward.

Beak

Using muted orange, CO 8 sts. Work 3 rows. Gather lightly through the cast-on and bind-off edges to form a tiny rounded beak. Sew to the face centered low between the eyes.

Feet

Using muted orange, make 2 tiny flat oval pads. Sew to the bottom front so the duck tilts upward slightly.

Duck Hat

Using pale taupe, knit a tiny shallow beret or cap.

1. CO 6 sts and join.
2. Increase evenly to 18 sts over 3 rounds.
3. Work 4 rounds plain.
4. Decrease evenly to 12 sts.
5. Bind off loosely.

Sew to the duck’s head at a slight angle.

Duck Bib

Using cream, CO 14 sts. Work flat in a small semicircle by increasing near both edges every other row for 4 rows, then work straight for 4 rows. Bind off.

Embroider or sew 5 to 7 tiny fuchsia flowers with green leaf stitches across the bib. Attach under the beak like a small apron panel.

Flowering Branch Accessory

This separate accessory rests on the table in front of the bunny. It is a short branch with several drooping fuchsia bell flowers and layered green leaves.

Stem

Make a firm green cord or wrapped wire stem about 4 inches long. Split it into small branchlets near the flower end.

Leaves

Make 4 to 6 pointed leaves in sage and moss green using the same leaf method as the hat trim, but vary the size slightly. Sew the leaves in layered pairs near the top of the stem.

Bell Flowers

For each flower, CO 12 sts in fuchsia. Work 4 rows stockinette. Gather one edge tightly and leave the opposite edge open. Add 3 to 5 pale pink fringe stamens or stitched strands at the open end. Make 5 to 7 flowers.

Sew the gathered ends to the branchlets so the flowers hang downward. This creates the bell-like fuchsia look shown in the image.

Dressing and Placement

Dress the bunny in this order for the cleanest finish.

1. Sew the legs and body closed and fully shape the torso.
2. Attach the head firmly to the neck.
3. Sew on the ears first, low and slightly behind the eye line.
4. Place the dress on the body and secure at the shoulders and back.
5. Add the narrow front underlayer panel if needed.
6. Attach the arms just below the cape line.
7. Sew the capelet around the neck.
8. Place the shoes and tack them in position.
9. Sew the hat over the ear bases.
10. Add the leaf trim to the hat.

Once the main dressing is complete, begin attaching the flowers. Start with the large skirt clusters, then add smaller blossoms upward. Finish with the cape flowers so they frame the face and upper body.

Shaping Tips for Accuracy

• Head: keep smooth, oval, and softly rounded
• Ears: long, narrow, and relaxed under the hat
• Body: compact and hidden by the dress
• Dress: rounded bell shape, not stiff or extremely wide
• Capelet: short and curved with neat front opening
• Flowers: dense on skirt, lighter on cape
• Hat: puffed beret shape sitting low across the forehead
• Shoes: small rounded Mary Jane style

These proportion choices matter more than exact row counts. If your yarn behaves differently, adjust lengths slightly while preserving the same silhouette.

Final Assembly and Facial Detailing

Pin all parts before sewing permanently. Check that the head sits centered over the feet, because the dress can hide small alignment issues until the very end.

Embroider the face last if you prefer, but do not enlarge the features. The expression should stay simple, kind, and quiet. Add only the tiny black eyes and the small stitched nose-mouth line.

Steam very lightly from a distance if needed, especially on the dress and cape, but avoid flattening the dimensional flowers.

Care Notes

• Display indoors away from strong sunlight.
• Handle the parasol and flower branch gently.
• Do not pull on the hat leaves, purse handle, or flower clusters.
• This design is best suited for gentle decorative use.

Quick Checklist Before You Finish

• Are the eyes small and evenly placed?
• Do the ears fall neatly under the beret?
• Does the cape sit above the dress flowers?
• Is the skirt full but still compact?
• Are the shoes visible below the hem?
• Does the hat include the green vine and two leaves?
• Does the duck have its bib and small hat?
• Have you included the purse, parasol, and flower spray?

Detailed Cleaning and Preservation Guidelines

Spot clean only with a barely damp cloth and mild soap. Blot gently rather than rubbing. Reshape while drying, especially around the head, hat, and flowers.

If the toy is stored, wrap it in clean tissue and keep it in a dry box. Store the parasol and flower branch separately so the finer parts do not bend. Avoid vacuum bags or heavy stacking, which can crush the dress and cape texture.