Cherry Blossom Teacup Bunny – Knitting

This charming knitted set is designed to match the soft spring mood of the image, with a long-eared bunny wearing a dusty pink dress, a cream cardigan, a pink bonnet trimmed with blossom-like bobbles, pale pink shoes, a tiny floral bouquet, a lace-style hand cloth, and a teacup-shaped basket. The little gray mouse companion completes the scene beautifully. If you love making handmade bunny dolls, heirloom stuffed animals, nursery decor, collectible toys, and giftable knitted keepsakes, this design is a lovely choice for your next project and a wonderful item for handmade gift shoppers and boutique-style makers alike.

Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.

Materials

• Main bunny yarn: sport or light DK weight yarn in warm cream
• Dress, bonnet, shoes, and mouse cape yarn: sport or light DK weight yarn in soft cherry blossom pink
• Mouse yarn: sport or light DK weight yarn in medium gray
• Flower centers and tiny accents: very small amounts of pale blush, soft green, taupe, and muted mauve
• Needles: a size that gives a firm fabric with no stuffing visible, typically 2.25 mm to 3 mm for sport or light DK yarn
• Double-pointed needles or magic loop setup for knitting small pieces in the round
• Tapestry needle for sewing seams and shaping details
• Black embroidery thread for eyes
• Brown or dark taupe embroidery thread for nose and mouth
• Stuffing: soft toy filling
• Fine floral wire, optional for arranging bouquet stems if you want extra structure
• Small scraps of cotton fabric or felt, optional only for stabilizing inside accessories if needed

Finished Size

The bunny in the image appears to be a seated decorative doll with a tall, elegant proportion. When made in sport or light DK yarn at a firm gauge, the finished bunny measures about 13 to 15 inches tall from the top of the head to the bottom of the feet, not including the bonnet ruffle.

The ears fall down on either side and reach close to the lower chest. The body is slim and softly weighted. The dress reaches below the knees when the bunny is seated. The mouse companion stands at about one quarter of the bunny’s height.

Gauge and Fabric Notes

Exact stitch count matters, but so does fabric character. The bunny in the image has a smooth, even stockinette fabric with very little stitch spread. Choose a needle size that gives a dense, neat surface.

The cardigan edges have a soft ruffled trim. The bonnet has a rounded edge ringed with small blossom-like bobbles. The dress bodice has a textured vertical motif that should sit centered and crisp. The skirt falls in a gentle A-line shape without stiffness.

Stuff all body parts firmly but not hard. The head should be slightly firmer than the body so the face keeps its shape. The arms should remain soft enough to rest naturally. The feet should be stuffed and shaped so the shoes face forward.

Abbreviations

• CO = cast on
• BO = bind off
• k = knit
• p = purl
• st(s) = stitch(es)
• rnd = round
• RS = right side
• WS = wrong side
• kfb = knit into front and back of stitch
• ssk = slip, slip, knit
• k2tog = knit 2 together
• p2tog = purl 2 together
• M1 = make 1 increase
• rep = repeat

Construction Overview

The bunny is worked as separate pieces and assembled. Begin with the legs and feet, work the body, then shape the head. Make the long ears separately and sew them into a gently drooping position. The arms are made separately and joined later.

After the main doll is complete, knit the pink dress, cream cardigan, pink blossom bonnet, shoes, bouquet, cloth, and teacup basket. Finish with the tiny gray mouse wearing a pink cape and flowered hat. The layered styling is what gives the whole scene its exact personality.

Bunny Legs and Lower Body

Legs make 2

Using cream yarn, CO 16 sts. Join carefully for working in the round.

1. Rnds 1 to 6: k all sts.
2. Rnd 7: k1, M1, knit to last 1 st, M1, k1. 18 sts.
3. Rnds 8 to 20: k all sts.
4. Rnd 21: k2tog, knit to last 2 sts, ssk. 16 sts.
5. Rnds 22 to 30: k all sts.

📌Thank you for reading the article

Stuff the lower part of the leg lightly. Set aside the first leg. Work the second leg the same way, but do not break yarn.

Join the legs by knitting across the second leg, casting on 4 sts for the center bridge, knitting across the first leg, and casting on 4 sts to complete the round. You now have 40 sts for the joined lower body.

Body Base

1. Rnds 1 to 6 after join: k all sts.
2. Rnd 7: k5, M1, k10, M1, k8, M1, k10, M1, k7. 44 sts.
3. Rnds 8 to 18: k all sts.
4. Rnd 19: k6, k2tog, k10, k2tog, k8, ssk, k10, ssk, k4. 40 sts.
5. Rnds 20 to 28: k all sts.

The lower body should remain slim, not round like a teddy bear. This bunny has an elongated torso with a gentle taper. Add stuffing gradually as you work. Keep the front smooth because the dress hangs over it.

Upper Body and Neck

1. Rnd 29: k4, k2tog, k8, k2tog, k8, ssk, k8, ssk, k4. 36 sts.
2. Rnds 30 to 38: k all sts.
3. Rnd 39: k2, k2tog, k6, k2tog, k8, ssk, k6, ssk, k2. 32 sts.
4. Rnds 40 to 46: k all sts.
5. Rnd 47: k all sts through back loop if desired for a subtle neck ridge.
6. Rnd 48: k2tog around. 16 sts.

Stuff the body firmly, especially at the lower torso, but keep the neck very firm so the head will sit upright. You may add an internal neck support if you like, but it is not required if your stuffing is dense enough.

Head

From the 16 neck sts, continue with cream yarn. Increase gradually to form a smooth oval head with a slightly narrow chin and broad cheek area, matching the gentle face in the image.

1. Rnd 1: kfb in every st. 32 sts.
2. Rnd 2: k all sts.
3. Rnd 3: k3, M1 around. 40 sts.
4. Rnd 4: k all sts.
5. Rnd 5: k4, M1 around. 48 sts.
6. Rnds 6 to 18: k all sts.

Begin stuffing the head firmly. Shape with your fingers as you fill so the cheeks are rounded and the face remains broad and calm.

1. Rnd 19: k4, k2tog around. 40 sts.
2. Rnd 20: k all sts.
3. Rnd 21: k3, k2tog around. 32 sts.
4. Rnd 22: k all sts.
5. Rnd 23: k2, k2tog around. 24 sts.
6. Rnd 24: k1, k2tog around. 16 sts.
7. Rnd 25: k2tog around. 8 sts.

Break yarn, thread through remaining sts, pull closed, and secure. Smooth the head well. The face should be softly oval, not spherical. The forehead is slightly high, the muzzle subtle, and the chin gently pointed.

Head Shaping

To capture the exact look, lightly sculpt the face with matching cream yarn. Take a long strand and define a soft vertical center line from forehead to nose area. Do not pull hard. The shaping should be barely visible.

Create a modest muzzle by taking two or three tiny anchoring stitches around the lower center of the face. The nose sits low on the face, much lower than on many toy rabbits. This is one of the key proportions that makes the bunny look tender and classic.

Ears make 2

The ears are long, flat, and softly tapered, with no inner contrast panel. They hang down from beneath the bonnet and extend to about the upper body. Use cream yarn.

CO 8 sts flat.

1. Row 1 RS: k all sts.
2. Row 2 WS: p all sts.
3. Row 3: k1, M1, knit to last 1 st, M1, k1. 10 sts.
4. Row 4: p all sts.
5. Row 5: k all sts.
6. Row 6: p all sts.
7. Row 7: k1, M1, knit to last 1 st, M1, k1. 12 sts.
8. Continue in stockinette, increasing 1 st at each end every 6th row until you have 20 sts.
9. Work even until ear length measures about 6 1/2 to 7 inches.

Now taper the tip gently.

1. Next RS row: k1, ssk, knit to last 3 sts, k2tog, k1.
2. Next WS row: p all sts.
3. Rep these 2 rows until 8 sts remain.
4. Next RS: k1, ssk, k2tog, k1. 6 sts.
5. WS: p all sts.
6. Next RS: k1, sl1-k2tog-psso, k1. 4 sts.
7. Next WS: p all sts.
8. Next RS: k2tog twice. 2 sts.
9. BO.

📌Thank you for reading the article

Make a second matching ear. Lightly steam or block so the fabric lies flat, then fold the cast-on edge slightly before sewing to the head. Stitch them low and outward so they drape naturally beneath the bonnet rather than standing up.

Arms make 2

Using cream yarn, CO 12 sts and join in the round.

1. Rnds 1 to 8: k all sts.
2. Rnd 9: k1, M1, k4, M1, k1, M1, k4, M1. 16 sts.
3. Rnds 10 to 16: k all sts.
4. Rnd 17: k2tog, k4, k2tog, k2, ssk, k4, ssk. 12 sts.
5. Rnds 18 to 34: k all sts.

Stuff the lower hand area a little more firmly than the upper arm. Flatten the top opening and sew closed. Attach the arms high on the shoulders so they angle slightly downward. In the image, the arms rest close to the body and do not project outward.

Pink Dress

The dress is one of the central visual elements. It has a textured bodice, narrow straps, and a fuller skirt. The hem has a simple clean edge that curls only very slightly, so keep the finishing neat.

Skirt and Bodice

Using pink yarn, CO 96 sts. Join in the round.

1. Rnds 1 to 4: k all sts.
2. Rnd 5: p all sts for a turning-like line that helps the hem sit flat.
3. Rnds 6 to 24: k all sts.

Begin shaping the waist with evenly spaced decreases.

1. Rnd 25: k10, k2tog around. 88 sts.
2. Rnds 26 to 28: k all sts.
3. Rnd 29: k9, k2tog around. 80 sts.
4. Rnds 30 to 32: k all sts.
5. Rnd 33: k8, k2tog around. 72 sts.
6. Rnds 34 to 36: k all sts.
7. Rnd 37: k7, k2tog around. 64 sts.

From here, work the front bodice texture over the center front 20 sts and keep the remaining sts in stockinette. A simple textured motif that matches the image well is alternating narrow columns of twisted stitches and purl channels.

Suggested front texture over center 20 sts:

1. Rnd 38: work to center front, p2, k2, p2, k2, p2, k2, p2, k2, p2, then knit remaining sts.
2. Rnd 39: repeat as established.
3. Rnd 40: twist each k2 pair by working second stitch first, then first stitch, keeping purl columns between them.
4. Rnd 41 to 48: repeat this texture sequence, crossing every 4th round.

Continue until the bodice reaches the underarm. Then divide for front and back.

Front

Work 24 sts for the front. Keep the center texture aligned. Work flat in rows.

1. Row 1 RS: k to end following established texture.
2. Row 2 WS: purl the purl columns and knit the knit columns to maintain the motif.

Work 8 rows. Then shape neckline.

1. Next RS: work 9 sts, BO 6 sts, work to end.
2. Work each side separately, decreasing 1 st at neck edge every RS row 2 times.
3. Work straight until strap length is correct for your bunny.

Each strap should be narrow and elegant. In the image they are soft and almost ribbon-like, sitting quite close together at the front.

Back

Work remaining 24 sts in stockinette for the back. Shape a shallow back opening if desired, or keep the back plain and fasten the dress at the shoulders after dressing the bunny. The image does not show closures, so use the neatest method for your style.

Sew the shoulder straps in place. Fit the dress to the bunny and adjust the hem so it falls just above the ankles when standing, or comfortably over the lap when seated.

Dress Blossoms

The skirt has several applied blossom accents in pale pink. Make 5 small flowers with 5 petals each.

For each flower, CO 3 sts in pale blush or soft pink. Work tiny petal shapes with short rows or simple i-cord loops. Make 5 petals and sew them into a flat flower. Add a tiny center knot if desired.

Sew one blossom near the lower left skirt, one near the lower right skirt, one centered toward the hem, and smaller blossoms near the sides to match the scattered garden effect seen in the image.

📌Thank you for reading the article

Cream Cardigan

The cardigan is cropped, open-front, and softly rounded at the lower edges. It has sweet decorative trimming and tiny pink blossom accents at the cuffs. The fit is relaxed, not tight.

Using cream yarn, CO 40 sts and work flat from lower back upward.

1. Rows 1 to 4: k all rows for a soft garter edge.
2. Rows 5 to 22: stockinette, beginning and ending each RS row with 3 garter sts for front bands.

Divide for fronts and back.

1. Right front: 10 sts
2. Back: 20 sts
3. Left front: 10 sts

Work each section separately to the shoulder. Shape the front edges with very gentle decreases near the neckline so the cardigan opens into a soft V. The lower front corners should appear slightly rounded rather than square.

Sew shoulder seams lightly. Pick up stitches around each armhole for sleeves.

Sleeves

Pick up 20 sts around each armhole and work in the round or flat as preferred.

1. Rows or rnds 1 to 14: stockinette.
2. Decrease once or twice toward the cuff so the sleeve narrows softly.
3. Finish with 4 rows of garter stitch.

At the cuff, add a faint pink decorative line by working one narrow row of embroidered duplicate stitches or one knitted contrast row if you prefer. The image shows a very subtle pink accent near the cuff, followed by tiny blossom details.

Work a ruffled edge trim around the open fronts and lower edge. Pick up stitches all around and work:

1. Row 1: k all sts.
2. Row 2: kfb in every 4th st.
3. Rows 3 to 5: k all rows.
4. BO loosely.

This creates the soft wavy edge visible on the cardigan fronts.

Make 2 or 4 tiny blossoms and sew them near the cuffs, keeping them small and delicate.

Bonnet

The bonnet is a major identifying detail. It is dusty pink, close-fitting around the face, ties beneath the chin, and has a full ring of rounded bobble-like blossoms around the outer edge. It must frame the bunny face softly without covering too much of the forehead.

Using pink yarn, CO 72 sts. Work flat.

1. Rows 1 to 6: garter stitch.
2. Rows 7 to 22: stockinette.

Begin shaping the back of the bonnet with short rows or centered decreases, similar to a classic baby bonnet. A simple option is:

1. Row 23 RS: k24, k2tog, k20, ssk, k24.
2. Row 24 WS: p all sts.
3. Repeat these decrease rows every RS row 6 times total.

When the depth is right, gather the back edge neatly and seam it to form the bonnet shape.

For the face edge trim, pick up stitches around the front opening and create a line of blossom bobbles.

1. Trim row 1: k all sts.
2. Trim row 2: work bobbles every 3 or 4 sts by knitting into one stitch 3 times, turning, purling back, turning, knitting 3 together on the next pass.
3. Trim row 3: k all sts.
4. BO.

The trim should look like a row of tiny round petals rather than large pom-poms. Keep them close and evenly sized.

For the ties, pick up 3 sts at one lower edge and work i-cord until long enough to tie in a small bow. Repeat on the other side. Tie the bow softly under the chin. In the image, the bow is small and centered, not oversized.

Shoes make 2

The shoes are pale pink Mary Jane style slippers with a strap across the top. They are rounded at the toe and smooth, with only a slight sole definition.

Using pale pink yarn, CO 10 sts for sole base. Work flat and increase at each end every RS row until 18 sts. Work 4 rows even. Pick up stitches around the sole and work upward in the round.

1. Rnds 1 to 5: k all sts.
2. Rnd 6: begin toe shaping with evenly spaced decreases across the front half.
3. Rnds 7 to 10: continue shaping until the shoe cups the foot snugly.

📌Thank you for reading the article

Create a strap by picking up 4 sts on one side of the opening. Work a narrow strip long enough to cross the top of the foot and sew on the opposite side. Add a tiny knot or nub at the strap edge if you want to echo the tiny side detail in the image.

Teacup Basket

This small accessory sits in the bunny’s left hand and resembles a soft knitted teacup with a handle. It is cream with a blush interior tone and tiny floral decoration near the base.

Using cream yarn, CO 24 sts and join in the round for the cup body.

1. Rnds 1 to 4: k all sts.
2. Rnd 5: p all sts for a subtle base ridge.
3. Rnds 6 to 12: k all sts.
4. Rnd 13: k1, M1 around. 48 sts.
5. Rnds 14 to 16: k all sts.
6. BO loosely.

This gives the upper lip a flared teacup shape. Make a circular base and sew it in neatly if your preferred method needs one. Lightly stuff or line the cup just enough to help it hold shape.

For the interior, use pink yarn to knit or crochet a small insert disk, then sew it inside so the cup looks softly lined. For the handle, make a narrow i-cord and attach it to one side in a rounded loop.

Add tiny embroidered blossoms near the lower outside edge in pink and green. Keep these very small. The accessory should feel delicate, not busy.

Hand Cloth

The bunny holds a small cream hand cloth with an eyelet or lace-look border. This piece hangs beneath the bouquet and adds softness to the styling.

Using cream yarn, CO 18 sts and work flat.

1. Rows 1 to 10: stockinette or smooth reverse stockinette if you prefer a softer look.
2. Rows 11 to 14: create a simple lace-look edge on one side by working yarn-over, k2tog pairs spaced evenly.
3. Rows 15 to 18: garter stitch.
4. BO loosely.

Block the cloth lightly so the lower point and edging show clearly. Fold or drape it in the bunny’s right hand before sewing the bouquet over part of it.

Blossom Bouquet

The bouquet is small and gathered, with pale pink blossoms and green stems. It should look compact and sweet, not like a large bunch.

Make 6 to 8 tiny flowers. Each flower can be made from 5 miniature petals stitched around a center. Use pale pink for petals and muted green for stems and leaves.

• Knit or form each petal as a tiny loop or short oval
• Sew 5 petals together into a blossom
• Attach to a narrow knitted or embroidered stem
• Add 1 or 2 tiny leaves in green

Gather the blossoms into a cluster and sew them into the bunny’s right hand over the cream cloth. The bouquet sits slightly forward and outward in the image.

Mouse Companion

The little mouse is an important part of the full set. It is gray with a round belly, tiny paws, a narrow tail, black eyes, a pink nose, a short pink cape, and a pink hat with blossoms and little ear openings or exposed ears.

Mouse Body

Using gray yarn, CO 12 sts and join in the round.

1. Rnd 1: kfb around. 24 sts.
2. Rnds 2 to 8: k all sts.
3. Rnd 9: k3, k2tog around. 20 sts.
4. Rnds 10 to 13: k all sts.
5. Rnd 14: k2, k2tog around. 15 sts.

Stuff firmly into an egg-like shape with a slightly wider lower half.

1. Rnd 15: k1, k2tog around. 10 sts.
2. Rnd 16: k2tog around. 5 sts.

Close tightly. Shape a little pointed nose with embroidery if desired.

Mouse Ears make 2

Using gray yarn, CO 6 sts. Work a tiny circle or half-circle and sew to the head. Place them high and slightly outward.

Mouse Arms and Feet

Make tiny stuffed tubes or embroidered nub limbs. In the image they are small and simple, with pale tips visible below the cape and body.

Mouse Tail

Make a thin gray i-cord or twisted cord and attach at the lower back. Keep it long and slender.

📌Thank you for reading the article

Mouse Cape

Using pink yarn, CO 24 sts and work flat.

1. Row 1 RS: k all sts.
2. Row 2 WS: p all sts.
3. Decrease 1 st at each end every RS row until the piece forms a small rounded cape.
4. Finish with 3 rows garter stitch and BO.

Sew or tie at the neck. The cape should cover the shoulders and upper body only, leaving the round belly visible below.

Mouse Hat

Using pink yarn, CO 20 sts and work a shallow cap. Shape to fit the head, leaving the gray ears visible or positioned at the sides. Add 2 or 3 tiny blossoms on top. Include muted taupe accents at the sides if you want to echo the little side petal details visible in the image.

Facial Embroidery

The bunny face is simple and refined. Use black thread for the eyes and brown or taupe thread for the nose and mouth. The eyes are tiny straight or slightly oval stitches placed wide apart and low on the face.

Embroider the nose as a small upside-down triangle or softly rounded Y shape. Extend the mouth downward with a short central stitch and two angled lines. Keep everything delicate. Overworked facial details will change the expression completely.

The mouse face is also minimal, with two tiny black eyes and a small pink nose. The mouth can be a single short stitch or omitted if the nose is expressive enough.

Assembly Order

1. Sew and shape the bunny body, head, ears, and arms.
2. Dress the bunny in the pink dress.
3. Add the cream cardigan and arrange the sleeves neatly.
4. Put on the pale pink shoes.
5. Sew the bonnet in place lightly after tying, or leave removable if preferred.
6. Attach the bouquet, cloth, and teacup basket to the hands with a few hidden securing stitches.
7. Assemble the mouse and dress it in the cape and hat.

When posing, seat the bunny so the legs hang straight and the feet face forward. Place the mouse close to the bunny’s right side. The bouquet should rest slightly across the dress. The teacup basket should tilt gently outward.

Styling Notes for an Exact Match

• Color balance: keep the cream warm and the pink muted, not bright bubblegum
• Face spacing: eyes low and wide, nose small and centered low on the face
• Ear placement: low enough to fall naturally under the bonnet edge
• Cardigan length: cropped to the waist area, ending well above the dress hem
• Dress shape: smooth skirt with modest fullness, not gathered too heavily
• Bonnet trim: rounded blossom-like edging all around the face opening
• Accessories: tiny, delicate, and balanced so nothing overwhelms the bunny

Final Assembly and Facial Detailing

Check the face before securing any accessories permanently. A few millimeters can change the entire expression, so place the eyes first, then the nose, then the mouth. Sew the ears so they drape evenly. Arrange the bonnet to frame the cheeks softly, then attach the bouquet, cloth, and teacup basket with hidden stitches only where needed.

Care Notes

Keep this knitted set for decorative use or gentle play. Store it away from direct sunlight to protect the soft pink shades. Handle the bouquet, bonnet trim, and mouse hat with care, since those details are intentionally delicate.

Quick Checklist Before You Finish

• Are the eyes evenly spaced and low on the face?
• Do both ears hang at matching lengths?
• Does the bonnet sit close without covering too much forehead?
• Is the cardigan cropped and softly open at the front?
• Do the shoes point forward evenly?
• Are the blossoms placed lightly rather than crowded?
• Does the mouse companion look balanced beside the bunny?

Detailed Cleaning and Preservation Guidelines

Spot clean whenever possible using a barely damp cloth and mild soap. Do not rub embroidered features harshly. If a deeper clean is needed, wash gently by hand in cool water, support the toy carefully, and dry flat on a towel. Reshape the bonnet trim, dress hem, and bouquet while damp. For long-term storage, wrap in clean tissue and keep in a dry box away from dust, moisture, and heat.